Smoke Hollow 47183T Grill Parts

47183T-02-R Stainless steel replacement tube burner for Smoke Hollow OEM # 47183T-02 for Smoke Hollow model 47183T. Electrode sold seperately # 04010 or # IG-20B. Includes:

• SS tube burner
• Electrode mounting bracket
• Spider exclusion screen
• Adjustable air shutter

Part Number: 47183T-02-R (Replaces Smoke Hollow 47183T-02)
Dimensions: 18 5/16” x 1”
Material: stainless steel
Weight: 0.5

47183T-11-R Charcoal and Sear Burner Cooking Grid for Smoke Hollow model 47183T. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Three (3) required for most models
• Sold individually

This part replaces original OEM part# 47183T-11.

Part Number: 47183T-11-R (Replaces Smoke Hollow 47183T-11)
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

47183T-12-R Gas Cooking Grid for Smoke Hollow model 47183T. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Two (2) required for most models
• Sold individually

Relaces original OEM part# 47183T-12, which was a glossy porcelain grid.

Part Number: 47183T-12-R (Replaces Smoke Hollow 47183T-12)
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

Stainless steel replacement Heat Tent for Smoke Hollow model 47183T. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.

Part Number: 47183T-24-R (Replaces Smoke Hollow 47183T-24)
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: TS-IG4010
Weight: 0.2

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

47183T-21-R Stainless steel replacement charcoal tray for Smoke Hollow.

Replaces original OEM part# 47183T-21.

Part Number: 47183T-21-R (Replaces Smoke Hollow 47183T-21)
Dimensions: 15 1/4” x 12 7/8”
Material: stainless steel
Weight: 7.5

Stainless steel charcoal drip tray (OEM TR028) and gas drip tray (OEM 47183T-30) with handle. Can be used for either purpose as a replacement, however it does not include a drip hole as in the original gas drip tray. Clean tray periodically for a longer life. Made in USA

NOTE: For model SH7000 charcoal drip tray OEM# SH7000-3, please measure & compare to your old tray to make sure this is the correct size for your model.

Part Number: CLA-DS0305 (Replaces Smoke Hollow 47183T-30)
Dimensions: 17 7/8” x 20 1/4”
Material: stainless steel
Weight: 3.9

Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

Universal four piece mini thermometer set. Great gift idea.

• 2 calibrated for steak, and 2 for chicken
• Mini thermometers for testing doneness of individual cuts of meat
• Silicone bezels for easy removal when hot
• Always use caution when handling hot objects

Part Number: 11381
Weight: .25

Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long.

Part Number: SR-7B
Dimensions: 19 1/2
Material: chrome steel
Weight: 1.0

Stainless steel jalapeno pepper tray.Cook all the heat from a jalapeño and you’re left with a fabulous taste of the southwest that leaves your taste buds singing for hours.

• Constructed of 304 stainless steel
• Measures 9-1/2” x 6-1/2”
• Holds up-to 24 jalapeño peppers
• American-Made

Part Number: JPT
Dimensions: 14 1/4” x 6”
Material: stainless steel
Weight: 0.6

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0