Sams M3206ALP Grill Parts

Highest quality replacement parts for your Sams M3206ALP - Free USA shipping $49 or more* - No Sales Tax*

Sams M3206ALP owners manual and diagrams

Diagrams & owners manual not available for grill model# M3206ALP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Sams model: M3206ALP

All of the parts we have for Sams M3206ALP are shown on this page. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Sams grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Sams M3206ALP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Sams model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

M3206ALP Burners

P02008024A / SCTB5

Click for photos

Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for Sams model M3206ALP.

Part Number: SCTB5 (Replaces Sams P02008024A)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

SCTB3

Click for photos

Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for Sams model M3206ALP.

Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

==> All Sams Burners.

M3206ALP Burner Brackets and Carryovers

P0220505ED / CLA-MS0108

Click for photos

Stainless steel burner mounting bracket with integrated gas carryover tubes. Made in USA

Part Number: CLA-MS0108 (Replaces Sams P0220505ED)
Dimensions: 31 7/8
Material: stainless steel
Weight: 1.5

==> All Sams Burner Brackets and Carryovers.

M3206ALP Cooking Grids

506S3

Click for photos

Stainless steel cooking grid set for Sams model M3206ALP.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All Sams Cooking Grids.

M3206ALP Heat Plates

P01708004A / SCHP1

Click for photos

Stainless steel heat plate for Sams model M3206ALP.

Part Number: SCHP1 (Replaces Sams P01708004A)
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 1.0

==> All Sams Heat Plates.

M3206ALP Igniter Components

P02609002B / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Sams P02609002B)
Weight: 0.11

P02502145C / IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B (Replaces Sams P02502145C)
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Sams Igniter Components.

M3206ALP Grease Trays

P06903028A / CLA-MS0124

Click for photos

Stainless steel lower heat shield for grease tray. Made in USA.

Part Number: CLA-MS0124 (Replaces Sams P06903028A)
Dimensions: 10 9/16” x 28 3/4”
Material: stainless steel
Weight: 2.70

P06903037A / CLA-MS0323

Click for photos

Stainless steel upper heat shield for grease tray. Made in USA.

Part Number: CLA-MS0323 (Replaces Sams P06903037A)
Dimensions: 8” x 31 1/4”
Material: stainless steel
Weight: 2.15

==> All Sams Grease Trays.

M3206ALP Heat indicators and Meat Thermometers

11381

Click for photos

Universal four piece mini thermometer set. Great gift idea.

2 calibrated for steak, and 2 for chicken
Mini thermometers for testing doneness of individual cuts of meat
Silicone bezels for easy removal when hot
Always use caution when handling hot objects

Part Number: 11381
Weight: .25

==> All Sams Heat indicators and Meat Thermometers.

M3206ALP Accessories

00230

Click for photos

Apple wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00230
Weight: 2.0

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

76745

Click for photos

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.

Part Number: 76745
Material: stainless
Weight: .2

41616

Click for photos

Rib & Roast Rack.

Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.

Part Number: 41616
Material: stainless steel
Weight: 0.5

WB-3

Click for photos

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

==> All M3206ALP Accessories.

BBQ Part Categories

Sams grill model M3206ALP - Tuesday, May 12 2026

Return to Sams grill parts main page

More Sams grill models we have parts for

DGB390SNP-D | DGB730SNB-D | DGE486SSP-D | DGE530BSP-D | GAS0440AS | GAS0565AS | GAS7540AS | GAS8560AS | GAS9670AS | GQ-5001D | GQ-5002D | GR2001402-MM-00 | GR2001408-MM-00 | GR2039201-MM-00 | GR2071001-MM-00 | GR2071008-MM-00 | GR2071013-MM-00 | GR2150901-MM-00 | GR2210601-MM-00 | GR2234801-MM-00 | GR2234802-MM-00 | GR2298901-MM-00 | GR3055-014571 | GR3055-014684 | GR3055-14684 | LBK-801-SA | M2505ANG | M3206ANG | M3207ALP | M3207ANG | M3905ALP | M3905ANG | M5205ALP | M5205ANG | MBI-80 | MEV05ALP | MEV06ALP | MEV808ALP | MFA05ALP | MG3208SLP | MONARCH04ALP | MONARCH04ANG | MONARCH04BNG | PKG-MVP-7200 | PKG-MVP-7500 | PKG-MVP-9200 | PS9500 | PS9900 | PS9900-SY18 | Complete list of Sams grill models...

*Orders for Sams grill model M3206ALP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026