PGS K30 Grill Parts

PGS K30

Highest quality replacement parts for your PGS K30 - Free USA shipping $49 or more* - No Sales Tax*

PGS K30 owners manual and diagrams

Click the small images on the right to view PGS K30 exploded parts diagrams and parts lists. Owners manual not available. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

PGS K30-4B5945-PartsExpS1.jpg

PGS K30-4B5945-PartsLstS1.jpg

Replacement grill parts for the PGS model: K30

All of the parts we have for PGS K30 are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for PGS grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct PGS K30 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your PGS model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

K30 Burners

HH-DSB

Click for photos

stainless steel H Burner for JNR and GJK Burner only for PGS model K30.

Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

HH-DSB13AM

Click for photos

Exclusive patented H type stainless steel dual burner and venturi assembly for PGS model K30. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK

Part Number: HH-DSB13AM
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

==> All PGS Burners.

K30 Cooking Grids

HH-SSGRID2

Click for photos

Stainless steel cooking grid for JNR for PGS model K30. JNR4 Series standard cooking grid is made of 1/4” stainless steel rods which are extremely durable and easy to clean. Each panel measures 15 1/2” x 9 15/16”.

Sold individually.

Part Number: HH-SSGRID2
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 3.2

==> All PGS Cooking Grids.

K30 Rock/Briquette Grates

HH-GRATE-SS

Click for photos

Premium grade stainless steel rock grate with 1/4” rods for WNK & TJK model grills.

Part Number: HH-GRATE-SS
Dimension Front-to-Back: 13 5/8”
Dimension Side-to-Side: 18”
Weight: 5.5

==> All PGS Rock/Briquette Grates.

K30 Igniter Components

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-18B

Click for photos

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-4B

Click for photos

Ignitor collector box and electrode for thru casting mounts. Preassembled. Includes:

Collector box and ceramic electrode with male spade connector
Locking nuts and washer
Ground lug (not shown)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-4B
Weight: 0.3

03800

Click for photos

Collector box and ceramic electrode with male spade connector. Mounts perpendicular through casting with threaded rod and locking nuts. Includes igniter ground lug, but no ground wire, see ground wire 03620.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03800
Material: ceramic
Weight: 0.2

IG-5B

Click for photos

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

IG-15B

Click for photos

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

03300

Click for photos

Battery powered push button spark generator with single round connector.

Installs behind the control panel, replacing a piezo plunger.
Fits most grills that use a push-button piezo plunger.
Uses a single AA battery (not included).
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03300
Dimensions: 2 7/8” x 2 1/16”
Weight: 0.3

03750

Click for photos

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03751

Click for photos

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

==> All PGS Igniter Components.

K30 Knobs and Handles

GG-K10

Click for photos

Main control knob for JNR, WNK, TJK.

Off position D-Value: 6 o'clock
Knob diameter: 1 7/8”
Socket diameter: 5/16”
Knob shaft: 1/4”

Part Number: GG-K10
Weight: 0.2

==> All PGS Knobs and Handles.

K30 Accessories

00150

Click for photos

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

BRGG

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

RR-2

Click for photos

Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.

Part Number: RR-2
Material: chrome steel
Weight: 1.0

==> All K30 Accessories.

BBQ Part Categories

PGS grill model K30 - Sunday, May 5 2024

Return to PGS grills main page

More PGS grill models we have parts for
A30 \| A40 \| G35 \| H30 \| H30P \| H30PS \| H40 \| K40 \| K60 \| Q30 \| Q40 \| S27 \| S27R \| S36 \| S36R \| S48 \| S48R \|

*Orders for PGS grill model K30 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024