North American Outdoors LX2618-JB Grill Parts

Highest quality replacement parts for your North American Outdoors LX2618-JB - Free USA shipping $49 or more* - No Sales Tax*

North American Outdoors LX2618-JB owners manual and diagrams

Diagrams & owners manual not available for grill model# LX2618-JB. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for North American Outdoors model: LX2618-JB

All of the parts we have for North American Outdoors LX2618-JB are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for North American Outdoors grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct North American Outdoors LX2618-JB BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your North American Outdoors model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

LX2618-JB Burners

Click for photos

Stainless steel tube burner for North American Outdoors model LX2618-JB.

SS tube burner
Electrode mounting bracket (not all models use bracket)
Spider exclusion screen
Adjustable air shutter.

NOTE:Some earlier versions of this burner, which are no longer available, were a bit larger in diameter.

Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6

==> All North American Outdoors Burners.

LX2618-JB Burner Brackets and Carryovers

Click for photos

Stainless steel burner mounting bracket with integrated gas carryover tubes. Please remove your old bracket and compare these details. Also review CLA-MS0180 to confirm the correct bracket for your grill.

Cross over tubes measure 5 3/8”
Mounting holes are round and about 7 1/8” apart, center to center
Back mounting side ”flips” up
When installed, cross over tubes are on top

Made in USA

Part Number: CLA-MS0092
Dimensions: 17 3/8
Material: stainless steel
Weight: 0.84

Click for photos

Stainless steel burner mounting bracket with integrated gas carryover tubes. Please remove your old bracket and compare these details. Also review CLA-MS0092 to confirm the correct bracket for your grill.

Cross over tubes measure 5 3/4”
Mounting holes are oblong and about 7 1/2” apart, center to center
Back mounting side ”flips” down
When installed, cross over tubes are on top

Made in USA

Part Number: CLA-MS0180
Dimensions: 17 3/8
Material: stainless steel
Weight: 0.90

==> All North American Outdoors Burner Brackets and Carryovers.

LX2618-JB Cooking Grids

Click for photos

Cast iron cooking grids for North American Outdoors model LX2618-JB. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 67692
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 26”
Material: matte cast iron
Weight: 13.2

==> All North American Outdoors Cooking Grids.

LX2618-JB Heat Plates

Click for photos

Stainless steel heat plate for North American Outdoors model LX2618-JB.

Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7

==> All North American Outdoors Heat Plates.

LX2618-JB Igniter Components

Click for photos

Small AA battery powered push button spark generator.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All North American Outdoors Igniter Components.

LX2618-JB Knobs and Handles

Click for photos

Universal 2 5/16” knob.

Selectable D-Value
Selectable socket diameter - 6mm or 8mm.
Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
Includes 6 shaft inserts and set screw.
Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

==> All North American Outdoors Knobs and Handles.

LX2618-JB Heat indicators and Meat Thermometers

Click for photos

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

==> All North American Outdoors Heat indicators and Meat Thermometers.

LX2618-JB Accessories

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All LX2618-JB Accessories.

BBQ Part Categories

North American Outdoors model LX2618-JB - Sunday, May 5 2024

Return to North American Outdoors grills main page

More North American Outdoors grill models we have parts for
720-0419 \| 720-0459 \| 843019U \| 848506A \| BB10367A \| BB10514A \| BB10571A \| BB10769A \| BB10769A-1 \| BB10807A \| BB10837A \| XH-300A-3310 \|