North American Outdoors BB10769A Grill Parts

Highest quality replacement parts for your North American Outdoors BB10769A - Free USA shipping $49 or more* - No Sales Tax*

North American Outdoors BB10769A owners manual and diagrams

Diagrams & owners manual not available for grill model# BB10769A. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the North American Outdoors model: BB10769A

All of the parts we have for North American Outdoors BB10769A are shown on this page. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for North American Outdoors grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct North American Outdoors BB10769A BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your North American Outdoors model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

BB10769A Burners

Click for photos

Stainless steel tube burner for North American Outdoors model BB10769A.

SS tube burner
Electrode mounting bracket (not all models use bracket)
Spider exclusion screen
Adjustable air shutter.

NOTE: Some earlier versions of this burner, which are no longer available, were a bit larger in diameter. Some models may not need the electrode tab.

Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6

==> All North American Outdoors Burners.

BB10769A Burner Brackets and Carryovers

Click for photos

Stainless steel burner mounting bracket with integrated gas carryover tubes. Please remove your old bracket and compare these details. Also review CLA-MS0180 to confirm the correct bracket for your grill.

Cross over tubes measure 5 3/8”
Mounting holes are round and about 7 1/8” apart, center to center
Back mounting side ”flips” up
When installed, cross over tubes are on top

Made in USA

Part Number: CLA-MS0092
Dimensions: 17 3/8
Material: stainless steel
Weight: 0.84

Click for photos

Stainless steel burner mounting bracket with integrated gas carryover tubes. Please remove your old bracket and compare these details. Also review CLA-MS0092 to confirm the correct bracket for your grill.

Cross over tubes measure 5 3/4”
Mounting holes are oblong and about 7 1/2” apart, center to center
Back mounting side ”flips” down
When installed, cross over tubes are on top

Made in USA

Part Number: CLA-MS0180
Dimensions: 17 3/8
Material: stainless steel
Weight: 0.90

==> All North American Outdoors Burner Brackets and Carryovers.

BB10769A Cooking Grids

Click for photos

Cast iron cooking grids for North American Outdoors model BB10769A. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 67692
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 26”
Material: matte cast iron
Weight: 13.2

==> All North American Outdoors Cooking Grids.

BB10769A Heat Plates

Click for photos

Stainless steel heat plate for North American Outdoors model BB10769A.

Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7

==> All North American Outdoors Heat Plates.

BB10769A Igniter Components

Click for photos

Small AA battery powered push button spark generator.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All North American Outdoors Igniter Components.

BB10769A Knobs and Handles

Click for photos

Universal 2 5/16” knob.

Selectable D-Value
Selectable socket diameter - 6mm or 8mm.
Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
Includes 6 shaft inserts and set screw.
Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

==> All North American Outdoors Knobs and Handles.

BB10769A Heat indicators and Meat Thermometers

Click for photos

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

==> All North American Outdoors Heat indicators and Meat Thermometers.

BBQ Part Categories

North American Outdoors grill model BB10769A - Friday, Aug 1 2025

Return to North American Outdoors grills main page

More North American Outdoors grill models we have parts for
720-0419 \| 720-0459 \| 843019U \| 848506A \| BB10367A \| BB10514A \| BB10571A \| BB10769A-1 \| BB10807A \| BB10837A \| LX2618-JB \| XH-300A-3310 \|