Nexgrill Valves, Orifices, and Manifolds

Flame thrower valve for natural gas. 15,000 BTU.

• Orifice included
• 30° angle
• Includes clamp and screws

Part Number: CLA-VN0232
Dimensions: 4 1/8
Material: aluminum/brass
Weight: 0.50

CLA-VN0232 fits this one Nexgrill model:
730-0230

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

CLA-VB0245 fits these 25 Nexgrill models:
720-0011 720-0018-LP 720-0026-LP 720-0047 720-0047-U 720-0050-LP 720-0055	720-0062-LP 720-0072 720-0103-LP 720-0108 720-0141-LP 720-0145-LP 720-0152-LP	720-0164 720-0171 720-0193 720-0289 720-0337 720-0339 720-0432	720-0586 720-0586A 720-0600 740-0141

Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01

Orifice for flame-thrower valves. 6mm head, 4.9mm thread diameter. #72 starter hole, must be drilled to proper drill size.

Part Number: 31300
Weight: 0.01

31300 fits these 3 Nexgrill models:
720-0057-3B	720-0057-4B	720-0108

Clamp-on valve. Does not include orifice. Uses orifice # 31300.

Part Number: 3052C
Dimensions: 4 1/2” x 2 3/8”
Material: brass
Weight: 0.5

3052C fits these 2 Nexgrill models:
720-0057-3B	720-0057-4B

Neoprene valve gasket for clamp-on gas control valves. 19mm.

Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01

00019 fits these 11 Nexgrill models:
720-0336 720-0336B 720-0336C	720-0336D 720-0709 720-0709B	720-0720 720-0745 730-0336B	730-0336C 730-0745