Grill-Parts home

Master Chef 85-3002-6 Grill Parts

Master Chef logo

 

Master Chef 85-3002-6

2009 Master Chef 280S 2-Burner LP gas grill with side burner

 

Highest quality replacement parts for your Master Chef 85-3002-6 - Free USA shipping $49 or more* - No Sales Tax*

 

Master Chef 85-3002-6 owners manual and diagrams
Diagrams & owners manual not available for grill model# 85-3002-6. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement BBQ grill parts for Master Chef model: 85-3002-6
This page shows all of the parts we know fit model Master Chef 85-3002-6. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Master Chef grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Master Chef 85-3002-6 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Master Chef model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


85-3002-6 Venturis

SG-B
Click for photos
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

$7.65
 

==> All Master Chef Venturis.
 





85-3002-6 Cooking Grids

Porcelain steel heavy cooking grid for Master Chef model 85-3002-6. Porcelain enameled, glossy finish. Sold individually.
NOTE: This grid has been designated as a replacement for part # 51051 that weighed 3.5 pounds, measured 13 3/4” x 25 1/4” and it had rounded corners. Due to the rounded corners, using # 53101as a replacement is about 1 3/4” shy on the side-to-side dimension.

Part Number: 53101
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 23 1/2”
Material: porcelain steel wire
Weight: 11.0

$59.43
 

==> All Master Chef Cooking Grids.
 





85-3002-6 Heat Plates

98401
Click for photos
Porcelain enameled steel heat plate for Master Chef model 85-3002-6.

Part Number: 98401
Dimension Front-to-Back: 6 1/8”
Dimension Side-to-Side: 23 13/16”
Material: porcelain steel
Weight: 1.13

$33.75
 

==> All Master Chef Heat Plates.
 





85-3002-6 Igniter Components

IG-46B
Click for photos
Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

$4.30
 

10342-T14
Click for photos
21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

$4.32
 

UP-4B
Click for photos
Universal push-button igniter. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.


This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: UP-4B
Weight: 0.3

$6.98
 

IG-7B
Click for photos
20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-7B
Weight: 0.02

$4.75
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

IG-11B
Click for photos
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
    Includes:
  • Gas collector box
  • Ceramic electrode and wire
  • Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-11B
Weight: 0.3

$9.74
 

==> All Master Chef Igniter Components.
 





85-3002-6 Accessories

BP-6
Click for photos
Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

$9.75
 

ITF-2
Click for photos
Extra long stainless steel fork with ergonomically correct handles. 20 1/2” long.

Part Number: ITF-2
Dimensions: 20 1/2
Material: stainless steel
Weight: 0.3

$13.80
 

24785
Click for photos
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

$22.60
 

BB-5
Click for photos
Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

$9.36
 

RR-3
Click for photos
Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

$13.71
 

SDDPS
Click for photos
Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

$18.07
 

==> All 85-3002-6 Accessories.
 



BBQ Part Categories













 
 

Master Chef gas grill 85-3002-6 - Tuesday, May 12 2026

Return to Master Chef grill parts main page



More Master Chef grill models we have parts for
G65002 | L3218 | MC280 | S280LP | S380 | S405LP | S420LP | S480 | S482 | S550 | T280LP | T360 | T405 | T405S | T420 | T420LP | T440 | T480 | T620LP | T620NG | 199-4758-2 | 199-4759-0 | 199-9556-2 | 199-9557-0 | 280 | 280LP | 280SLP | 405LP | 85-1100 | 85-1208 | 85-1618-4 | 85-3001-8 | 85-3002-8 | 85-3003-4 | 85-3004-2 | 85-3005-0 | 85-3008-4 | 85-3009-2 | 85-3023-6 | 85-3024-4 | 85-3025-2 | 85-3039-0 | 85-3040-4 | 85-3041-2 | 85-3044-6 | 85-3045-4 | 85-3052-6 | 85-3062-2 | 85-3063-0 | Complete list of Master Chef grill models...



*Orders for Master Chef grill model 85-3002-6 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026