Master Chef 280LP Grill Parts

Highest quality replacement parts for your Master Chef 280LP - Free USA shipping $49 or more* - No Sales Tax*

Master Chef 280LP owners manual and diagrams

Diagrams & owners manual not available for grill model# 280LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Master Chef model: 280LP

All of the parts we have for Master Chef 280LP are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Master Chef grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Master Chef 280LP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Master Chef model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

280LP Venturis

SG-B

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Master Chef Venturis.

280LP Cooking Grids

Porcelain steel heavy cooking grid for Master Chef model 280LP. Porcelain enameled, glossy finish. Sold individually.
NOTE: This grid has been designated as a replacement for part # 51051 that weighed 3.5 pounds, measured 13 3/4” x 25 1/4” and it had rounded corners. Due to the rounded corners, using # 53101as a replacement is about 1 3/4” shy on the side-to-side dimension.

Part Number: 53101
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 23 1/2”
Material: porcelain steel wire
Weight: 11.0

==> All Master Chef Cooking Grids.

280LP Heat Plates

98401

Click for photos

Porcelain enameled steel heat plate for Master Chef model 280LP.

Part Number: 98401
Dimension Front-to-Back: 6 1/8”
Dimension Side-to-Side: 23 13/16”
Material: porcelain steel
Weight: 1.13

==> All Master Chef Heat Plates.

280LP Igniter Components

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

UP-4B

Click for photos

Universal push-button igniter. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: UP-4B
Weight: 0.3

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-11B

Click for photos

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.

Gas collector box
Ceramic electrode and wire
Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-11B
Weight: 0.3

==> All Master Chef Igniter Components.

280LP Accessories

00215

Click for photos

GrillPro Wood chips from genuine oak whiskey barrels.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

40240

Click for photos

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Dimensions: 16” x 4”
Material: chrome steel
Weight: 0.9

40538

Click for photos

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

98130

Click for photos

Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Dimensions: 11
Material: porcelain steel
Weight: 1.0

WB-3

Click for photos

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

==> All 280LP Accessories.

BBQ Part Categories

Master Chef model 280LP - Tuesday, May 12 2026

Return to Master Chef grills main page

More Master Chef grill models we have parts for

199-9556-2 | 199-9557-0 | 280 | 280SLP | 405LP | 85-1100 | 85-1208 | 85-1618-4 | 85-3001-8 | 85-3002-6 | 85-3002-8 | 85-3003-4 | 85-3004-2 | 85-3005-0 | 85-3008-4 | 85-3009-2 | 85-3023-6 | 85-3024-4 | 85-3025-2 | 85-3039-0 | 85-3040-4 | 85-3041-2 | 85-3044-6 | 85-3045-4 | 85-3052-6 | 85-3062-2 | 85-3063-0 | 85-3064-8 | 85-3065-6 | 85-3096-2 | 85-3098-8 | 85-3099-6 | 85-3100-2 | 85-3101-0 | 85-3102-8 | 85-3103-6 | 85-3106-0 | 85-3107-8 | B401S | E480 | E500 | E600 | G20501 | G20715 | G20718 | G20801 | G30531LP | G30545 | Complete list of Master Chef grill models...

*Orders for Master Chef grill model 280LP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026