Huntington Knobs and Handles
Universal hardwood handle. Fits many grills. Adjusts to hole spacing up to 23”.
Part Number: WH-3B
Dimensions: 24 1/16
Material: Wood
Weight: 0.7
Universal wood handle kit, 13” between screw centers
Part Number: WH-1B
Material: Polyurethane Finish
Weight: 0.40
Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid
Part Number: SP5001-40 Weight: .03
| SP5001-40 fits these 12 Huntington models: |
| | | | |
KNOB VALVE LARGE
Part Number: SP11-7
Weight: 0.1
Universal durable black phenolic lid handle with threaded brass insert. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.
Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3
Universal gas appliance knob
Part Number: K-6B
Dimensions: 2
Weight: 0.1
Universal knobs, fits most BBQ valves, moveable dial face. PACK OF TWO KNOBS.
Part Number: K-10B
Dimensions: 2
Weight: 0.10
Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0
KNOB GAS VALVE SMALL
Part Number: 50479-168 Weight: 0.1
| 50479-168 fits these 2 Huntington models: |
| | | | |
Black lid handle. Fits older GrillPro and other models which use a half-handle that is 10 3/4” long. Requires 8 3/4” mounting holes, center to center.
Part Number: 30230228 Weight: 0.45
| 30230228 fits this one Huntington model: |
| | | | |
LID HANDLE RESIN - 30% NYLON
Part Number: 26006-34 Weight: 1.0
| 26006-34 fits these 6 Huntington models: |
| | | | |
HANDLE INSERT - REGAL 625
Part Number: 26006-305 Weight: 1.0
| 26006-305 fits these 2 Huntington models: |
| | | | |
HANDLE INSERT-REGAL 440/500 *
Part Number: 26005-305
Weight: 1.0
LID HANDLE RESIN W/REGAL STRAP
Part Number: 26003-34A Weight: 1.0
| 26003-34A fits these 2 Huntington models: |
| | | | |
Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4”.
- Off position D-Value: 12 or 6 or 3 or 9 o'clock
- Knob diameter: 2 3/16”
- Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
- Knob shaft: Flat or 1”
Part Number: 25960 Weight: 0.20
Lid handle bent 500 assembly. Mounting holes center to center about 23 5/8”. (Used with handle heat shield 10184-E124 when replacing handle 10184-E70.)
Part Number: 24005-12AB Dimensions: 25 1/2
Weight: 1.10
| 24005-12AB fits these 5 Huntington models: |
| | | | |
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A Dimensions: 25
Weight: .85
| 24005-12A fits these 85 Huntington models: |
| | | | |
Genuine OEM Huntington small control knob.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 22001-668 Weight: 0.1
| 22001-668 fits these 29 Huntington models: |
| | | | |
DOOR HANDLE RESIN *
Part Number: 21475-138 Weight: 1.0
| 21475-138 fits these 22 Huntington models: |
| | | | |
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP
Part Number: 10472-K431 Weight: 0.1
| 10472-K431 fits these 180 Huntington models: |
| | | | |
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231 Weight: 0.1
| 10472-K231 fits these 107 Huntington models: |
| | | | |
CONTROL KNOB - BEZEL BLK
Part Number: 10472-E38 Weight: 0.1
| 10472-E38 fits these 7 Huntington models: |
| | | | |
Handle heat shield installs onto the body of the grill before installing the handle. (Used with handle 24005-12AB when replacing handle 10184-70).
Part Number: 10184-E124
Weight: 1.0
Stainless steel lid handle with rubber holding area that replaces resin lid handle 30230230; includes mounting brackets and two screws.
Part Number: 10070-E13A Weight: .85
| 10070-E13A fits these 3 Huntington models: |
| | | | |
Universal 2 5/16” knob.
- Selectable D-Value
- Selectable socket diameter - 6mm or 8mm.
- Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
- Includes 6 shaft inserts and set screw.
- Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).
Part Number: 02342 Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20
Universal black control knob. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01800 Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05
Black control knob for Fire Magic Custom, Regal, and Gourmet grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 2”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01700 Dimensions: 2” x 2”
Material: plastic
Weight: 0.1
| 01700 fits this one Huntington model: |
| | | | |
