Huntington 6835-64 Grill Parts

Genuine OEM Huntington stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG) for Huntington model 6835-64. For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8

Rear burner tubular with deflector; includes collector box, electrode and connector wire for Huntington model 6835-64.

Part Number: 27906-354
Dimensions: 32
Weight: 1.0

Genuine OEM Huntington Side Burner for Huntington model 6835-64. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: 10390-E10
Weight: 0.4

Replacement for OEM part numbers 52002-181, 52005-281, 52007-181 cast iron cooking grids per the manufacturer for Huntington model 6835-64. SOLD INDIVIDUALLY.
NOTE: The number of pieces required varies by grill size. Check your grill's cooking grids support area to determine the number of panels needed.

Part Number: 11241
Dimension Front-to-Back: 17 7/16”
Dimension Side-to-Side: 6 3/16”
Material: cast iron
Weight: 5.5

Genuine OEM Huntington cooking grid for Huntington model 6835-64. Porcelain treated, matte finish. The number required varies, check your grill. SOLD INDIVIDUALLY.

Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10

Genuine OEM Huntington stainless steel Flav-R-Wave for Huntington model 6835-64.

Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14

COLLECTOR BOX 550 UPPER 430SS

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 52216-014
Dimensions: 28
Weight: 0.2

Genuine OEM Huntington push-button electronic ignitor.

• 5 spark outlets (spade connectors)
• Uses AAA battery (not included)
• Requires 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-251
Weight: 0.5

Genuine OEM Huntington electrode with 14” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: 10342-E13
Weight: 0.05

Genuine OEM Huntington 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

GREASE PAN - 330/440/550
This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

10472-K431 Control knob large. Black with stainless steel BA strip.

Genuine OEM control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 2 1/4”
• Socket diameter: 5/16”
• Knob stem: 1/2”

Part Number: 10472-K431
Weight: 0.1

10472-K231 Control knob small. Black with stainless steel BA strip.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 10472-K231
Weight: 0.1

Rubber castor, 3” w/plate, locking.

Part Number: 10892-23
Weight: 0.66

Genuine OEM Huntington Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Washer

Part Number: S21255
Weight: 0.01

Hinge pin clip.

Part Number: S21233
Weight: 0.01

LID BUMPER

Part Number: Y-11231
Weight: 0.01

GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.

Part Number: 98121
Dimensions: 12” x 12”
Material: porcelain steel
Weight: 1.6

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.2