Grand Cafe CGI09ALP Grill Parts

Grand Cafe logo

 

 

Highest quality replacement parts for your Grand Cafe CGI09ALP - Free USA shipping $49 or more* - No Sales Tax*

 

Grand Cafe CGI09ALP owners manual and diagrams
Diagrams & owners manual not available for grill model# CGI09ALP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for Grand Cafe model: CGI09ALP
This page shows all of the parts we know fit model Grand Cafe CGI09ALP. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Grand Cafe grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Grand Cafe CGI09ALP BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Grand Cafe model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


CGI09ALP Burners

Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for Grand Cafe model CGI09ALP.

Part Number: SCTB5 (Replaces Grand Cafe P02008066B)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

$36.43
 

Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for Grand Cafe model CGI09ALP.


Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

$37.70
 
SALE  $29.85

 





CGI09ALP Cooking Grids

Cast iron cooking grids for Grand Cafe model CGI09ALP. SET OF TWO (2) panels.
  • Porcelain treated, matte finish
  • Each panel measures 19 1/8” x 12 3/8”
  • Overall dimensions: 19 1/8” x 24 3/4”


Part Number: CG-58P-CI-X2 (Replaces Grand Cafe P01615009H)
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 16.7

$153.72
 

Cast iron cooking grid for Grand Cafe model CGI09ALP.
  • Sold individually
  • Number required varies, check your grill
  • Porcelain enameled, glossy finish


Part Number: 22005-181-R
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 12 1/2”
Material: Cast iron
Weight: 7.5

$61.41
 

Stainless steel cooking grid set for Grand Cafe model CGI09ALP.
  • 5/16” diameter stainless rods
  • 304 stainless steel


Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

$277.67
 

Cast iron cooking grid for Grand Cafe model CGI09ALP. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-58P-CI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 8.35

$83.77
 

Premium quality heavy duty stainless steel cooking grid for Grand Cafe model CGI09ALP. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.

  • 304 commercial grade stainless steel
  • Large diameter 5/16” solid stainless rods
  • Dimensions: 19 1/4” x 12 1/2”
  • Made in USA.
  • Sold individually.


Part Number: CLA-GS0190
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12 1/2”
Material: stainless steel
Weight: 8.0

$114.05
 

 





CGI09ALP Heat Plates

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Grand Cafe model CGI09ALP. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314 (Replaces Grand Cafe P01708033E)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

$27.28
 

Stainless steel heat plate; also referred to as a flame tamer and savor plate for Grand Cafe model CGI09ALP.

Part Number: SCHP4 (Replaces Grand Cafe P01708033E)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

$27.28
 

 





CGI09ALP Igniter Components

Battery powered push button igniter.
  • Has two (2) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB2-B (Replaces Grand Cafe P02502252C)
Weight: 0.3

$34.11
 

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG2006
Weight: 0.2

$19.40
 

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

$4.32
 

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-17B
Weight: 0.11

$11.34
 

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-7B
Weight: 0.02

$4.75
 

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-20B
Weight: 0.05

$6.61
 

 





CGI09ALP Accessories

GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

$6.87
 

15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92
 

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

$22.60
 

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76
 

Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.

Part Number: 98121
Dimensions: 12” x 12”
Material: porcelain steel
Weight: 1.6

$27.92
 

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

$5.23
 

 



BBQ Part Categories












 
 

Grand Cafe grill CGI09ALP - Tuesday, May 12 2026

Return to Grand Cafe grill parts main page



More Grand Cafe grill models we have parts for
C3906ALP | CGE06ALP | CGI07ALP | CGI08ALP | GC1000 | GC1001 | GC2000 | GC2001 | GC3000 | GC3001 | GC3500 | GC3501 | Grand Cafe II | Regal |



*Orders for Grand Cafe grill model CGI09ALP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026