Grand Cafe CGI08ALP Grill Parts

Highest quality replacement parts for your Grand Cafe CGI08ALP - Free USA shipping $49 or more* - No Sales Tax*

Grand Cafe CGI08ALP owners manual and diagrams

Diagrams & owners manual not available for grill model# CGI08ALP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for Grand Cafe model: CGI08ALP

All of the parts we have for Grand Cafe CGI08ALP are shown on this page. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Grand Cafe grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Grand Cafe CGI08ALP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grand Cafe model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CGI08ALP Burners

P02008032A / SCTB5

Click for photos

Sam's Club burner W/ Lip like OEM for Grand Cafe model CGI08ALP.

Part Number: SCTB5 (Replaces Grand Cafe P02008032A)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All Grand Cafe Burners.

CGI08ALP Cooking Grids

P01604013B / 506S3

Click for photos

Stainless steel cooking grid set for Grand Cafe model CGI08ALP.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3 (Replaces Grand Cafe P01604013B)
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All Grand Cafe Cooking Grids.

CGI08ALP Heat Plates

P01708033E / CLA-TS0314

Click for photos

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Grand Cafe model CGI08ALP. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314 (Replaces Grand Cafe P01708033E)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

P01708033E / SCHP4

Click for photos

Stainless steel heat plate; also referred to as a flame tamer and savor plate for Grand Cafe model CGI08ALP.

Part Number: SCHP4 (Replaces Grand Cafe P01708033E)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

==> All Grand Cafe Heat Plates.

CGI08ALP Igniter Components

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

P02502265C / IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B (Replaces Grand Cafe P02502265C)
Weight: 0.3

P02609010B / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Grand Cafe P02609010B)
Weight: 0.11

==> All Grand Cafe Igniter Components.

CGI08ALP Accessories

40240

Click for photos

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

BRGG

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

WB-8RH

Click for photos

Replacement brass bristle brush head for WB-8 brush. Screws included.

Part Number: WB-8RH
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.2

==> All CGI08ALP Accessories.

BBQ Part Categories

Grand Cafe gas grill CGI08ALP - Sunday, May 5 2024

Return to Grand Cafe grills main page

More Grand Cafe grill models we have parts for
C3906ALP \| CGE06ALP \| CGI07ALP \| CGI09ALP \| GC1000 \| GC1001 \| GC2000 \| GC2001 \| GC3000 \| GC3001 \| GC3500 \| GC3501 \| Grand Cafe II \| Regal \|

*Orders for Grand Cafe grill model CGI08ALP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024