Falcon GF 430 Grill Parts

Falcon logo

 

 

Highest quality replacement parts for your Falcon GF 430 - Free USA shipping $49 or more* - No Sales Tax*

 

Falcon GF 430 owners manual and diagrams
Diagrams & owners manual not available for grill model# GF 430. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement BBQ grill parts for Falcon model: GF 430
All of the parts we have for Falcon GF 430 are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Falcon grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Falcon GF 430 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Falcon model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


GF 430 Cooking Grids

1-piece porcelain coated steel rod cooking grid for Falcon model GF 430.

Part Number: CG-11P
Dimension Front-to-Back: 13 1/16”
Dimension Side-to-Side: 19 5/8”
Material: Porcelain steel
Weight: 4.6

$83.01
 

 





GF 430 Rock/Briquette Grates

Rock grate for holding lava rock or ceramic briquettes.

Part Number: BG-4
Dimension Front-to-Back: 11 5/8”
Dimension Side-to-Side: 19”
Material: Carbon steel
Weight: 2.7

$30.65
 

 





GF 430 Valves, Orifices, and Manifolds

Brass spud orifice with 5/16” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01

$7.54
 

Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
  • For use with LP gas
  • Includes two orifices drilled to #57 drill size
  • Includes pre-assembled 45 degree angle fitting, not shown in photo


Part Number: VLV-28
Material: brass
Weight: 1.1

$58.00
 

 





GF 430 Accessories

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.95
 

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

$9.75
 

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

$18.27
 

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

$15.59
 

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

  • Works with both charcoal and gas grills.
  • Easy to use and refill.
  • Long lasting cast iron.


Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

$27.70
 

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.



Part Number: CLWR
Material: stainless steel
Weight: 1.0

$19.95
 

Cannon Grill Towel.

Part Number: CGT
Dimensions: 16” x 25”
Weight: 0.30

$20.58
 

 



BBQ Part Categories














 
 

Falcon gas grill GF 430 - Tuesday, May 12 2026

Return to Falcon grill parts main page



More Falcon grill models we have parts for
W4029-5 | W4049 | 1000 with 4in venturi | 1000 with 7in venturi | 2000 with 4in venturi | 2000 with 7in venturi | 3029F | 3029F6 | 3049F | 3049F6 | 4000 with 4in venturi | 4000 with 7in venturi | 4029F | 4029F6 | 4049F | 4049F6 | 4100 | 4200 | 4300 | 4400 | 5000 with 4in venturi | 5000 with 7in venturi | 5100 | 5200 | 5300 | 5400 | 551990 | 551996 | 552890 | 552990 | 553890 | 553920 | FG700S | FN700S | GF300517 | GF300617 | GF304-4 | GF400517 | GF400617 | GF430-2 | GF430-217-SB | GF430-286-EB | GF430-286-EI | GF430-292-EB | GF430-292-EL | GF430-329-EA | GF430-329-EI | GF430-5 | Complete list of Falcon grill models...



*Orders for Falcon grill model GF 430 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026