Charbroil Signature 463675517 Grill Parts

Charbroil 463675517

Char-Broil Signature Series™ 2-Burner Gas Grill

Highest quality replacement parts for your Charbroil Signature 463675517 - Free USA shipping $49 or more* - No Sales Tax*

Charbroil 463675517 owners manual and diagrams

Diagrams & owners manual not available for grill model# 463675517. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Charbroil Signature 463675517

This page shows all of the parts we know fit model Charbroil 463675517. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Charbroil grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Charbroil 463675517 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Charbroil model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

463675517 Burners

10081

Click for photos

stainless steel burner for Charbroil model 463675517.

Part Number: 10081
Dimensions: 17 3/4” x 0 5/8”
Material: stainless steel
Weight: 0.4

==> All Charbroil Burners.

463675517 Burner Brackets and Carryovers

05590

Click for photos

Burner crossover tube.

Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1

==> All Charbroil Burner Brackets and Carryovers.

463675517 Cooking Grids

60162

Click for photos

matte finish cast iron cooking grid for Charbroil model 463675517.

Part Number: 60162
Dimension Front-to-Back: 18 3/16”
Dimension Side-to-Side: 18 1/2”
Material: matte cast iron
Weight: 10.0

==> All Charbroil Cooking Grids.

463675517 Heat Plates

CLA-TS0016-X3

Click for photos

SET OF THREE/3 PACK Stainless steel Flame Tamer for Charbroil model 463675517. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6

CLA-TS0016

Click for photos

Stainless steel Flame Tamer for Charbroil model 463675517. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3

VCHP1

Click for photos

Stainless steel heat plate for Charbroil model 463675517. Some OEM originals were porcelain coated steel. This stainless version, which resists rust and corrosion better, is far superior to original porcelain part.

Part Number: VCHP1
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 0.7

==> All Charbroil Heat Plates.

463675517 Igniter Components

03152

Click for photos

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

Push-button ignition module switch with two male spade connectors on back
Two 20” wires with female spade connectors
One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

03344

Click for photos

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

1.5 volt
Has four(4) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03344
Dimensions: 2” x 2 1/2”
Weight: 0.5

04450

Click for photos

Ignition electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04450
Dimensions: 3 5/16” x 0 7/8”
Weight: 0.1

==> All Charbroil Igniter Components.

463675517 Heat indicators and Meat Thermometers

00012

Click for photos

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

Requires minimum 3/8” mounting hole
Single 1 3/8” probe
Threaded portion of probe stops at 1/2” from base
See photo for details

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

==> All Charbroil Heat indicators and Meat Thermometers.

463675517 Accessories

00215

Click for photos

GrillPro Wood chips from genuine oak whiskey barrels.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

40538

Click for photos

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

RR-3

Click for photos

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

90963

Click for photos

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.2

==> All 463675517 Accessories.

BBQ Part Categories

Charbroil model 463675517 - Tuesday, Oct 7 2025

Return to Charbroil grill parts main page

More Charbroil grill models we have parts for

4637818 | 4637819 | 4637820 | 4637822 | 4637823 | 4637825 | 4637827 | 4637828 | 4637829 | 4637830 | 4637831 | 4637832 | 4637833 | 4637835 | 4637837 | 4637845 | 4637847 | 4637848 | 4637890 | 4637913 | 4637928 | 4638003 | 4638004 | 4638005 | 4638006 | 4638007 | 4638008 | 4638010 | 4638012 | 4638013 | 4638014 | 4638018 | 4638019 | 4638021 | 4638022 | 4638024 | 4638025 | 4638027 | 4638065 | 4638067 | 4638072 | 4638074 | 4638075 | 4638078 | 4638081 | 4638082 | 4638083 | 4638084 | 4638085 | 4638086 | Complete list of Charbroil grill models...

*Orders for Charbroil Signature grill model 463675517 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: Oct 7 2025