Broil King 9576-43NZ Grill Parts

Highest quality replacement parts for your Broil King 9576-43NZ - Free USA shipping $49 or more* - No Sales Tax*

Broil King 9576-43NZ owners manual and diagrams

Diagrams & owners manual not available for grill model# 9576-43NZ. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Broil King model: 9576-43NZ

This page shows all of the parts we know fit model Broil King 9576-43NZ. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Broil King grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Broil King 9576-43NZ BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Broil King model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

9576-43NZ Burners

Side burner lid IR stainless steel for Broil King model 9576-43NZ. Sometimes shipped with vinyl peel-off coating; remove before use.

Part Number: 23000-253
Dimensions: 14 1/4” x 11 3/16”
Material: stainless steel
Weight: 1.6

==> All Broil King Burners.

9576-43NZ Cooking Grids

22005-284

Click for photos

Premium quality heavy duty stainless steel cooking grid SOLD INDIVIDUALLY for Broil King model 9576-43NZ.

High quality stainless steel
5/16” solid stainless rods
Sold individually

Part Number: 22005-284
Dimension Front-to-Back: 19 3/16”
Dimension Side-to-Side: 6 3/16”
Material: stainless steel
Weight: 5.30

22005-281-R

Click for photos

Aftermarket reversible heavy cast iron cooking grid for Broil King model 9576-43NZ.

Sold individually
Number required varies, check your grill
Porcelain treated, flat matte finish
Pointed side is designed for perfect sear marks
Grooved side captures juices for continous basting

Fits: Broil King 500/625/750 series grills.

NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.

Part Number: 22005-281-R
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 6 1/16”
Material: Cast iron
Weight: 5.0

67845-1PC

Click for photos

Cast iron cooking grid for Broil King model 9576-43NZ. Porcelain treated, flat matte finish. Sold individually, number required varies, check your grill.

Part Number: 67845-1PC
Dimension Front-to-Back: 19 3/16”
Dimension Side-to-Side: 6 1/16”
Material: matte cast iron
Weight: 5.5

67845

Click for photos

Cast iron cooking grids, porcelain treated, flat matte finish for Broil King model 9576-43NZ.

Part Number: 67845
Dimension Front-to-Back: 19 3/16”
Dimension Side-to-Side: 30 5/16”
Material: matte cast iron
Weight: 27.2

==> All Broil King Cooking Grids.

9576-43NZ Heat Plates

22209-904

Click for photos

Genuine OEM Broil King stainless steel Flav-R-Wave heat plate / Vaporizer for Broil King model 9576-43NZ. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM Broil King replacement part, and it is sometimes marketed as part number 18433.

Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15

==> All Broil King Heat Plates.

9576-43NZ Igniter Components

22225-014A

Click for photos

Genuine OEM Broil King front collector box, top & bottom combo. Includes top 22215-014 and bottom 22225-014. This part has been redesigned by the manufacturer and is now a little shorter but still fully functional in the original grills. Fits 4-Burner grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 22225-014A
Dimensions: 21 5/8
Material: stainless steel
Weight: 1.2

10342-T18

Click for photos

Genuine OEM Broil King 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

10342-E13

Click for photos

Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

10342-247

Click for photos

Genuine OEM Broil King electronic push-button 4-spade igniter.

Uses AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-247
Weight: 0.5

10342-244

Click for photos

Electronic push-button 1-spade igniter.

Uses AAA battery (not included)
Requires 3/4” mounting hole
Also replaces part 10342-248

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-244
Weight: 0.3

==> All Broil King Igniter Components.

9576-43NZ Grease Trays

27249-904

Click for photos

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

GREASE SHIELD 250 .8MM 430 SS

Part Number: 27243-904
Dimensions: 8” x 13”
Weight: 1.0

22009-901

Click for photos

Genuine OEM Broil King Porcelain Grease Pan.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

==> All Broil King Grease Trays.

9576-43NZ Knobs and Handles

22001-668

Click for photos

Genuine OEM Broil King small control knob.

Off position D-Value: 6 o'clock
Knob diameter: 1 7/8”
Socket diameter: 5/16”
Knob shaft: 1/2”

Part Number: 22001-668
Weight: 0.1

BEZEL SS FLAT SML ”250/500/625/750 ”A””

Part Number: 22001-164
Weight: 0.1

LID HANDLE-STRAIGHT 500 430SS*

Part Number: 24005-239
Weight: 1.0

LID HANDLE-STRAIGHT 250 430SS*

Part Number: 24003-239
Weight: 1.0

26009-917

Click for photos

HANDLE END CAP CHROME *

Part Number: 26009-917
Weight: 1.0

HANDLE WEDGE BLK

Part Number: 24009-938
Weight: 1.0

HANDLE SEAT CABINET 430SS *

Part Number: 21079-906
Weight: 1.0

HANDLE CABINET 'A'

Part Number: 21171-23
Weight: 1.0

==> All Broil King Knobs and Handles.

9576-43NZ Regulators and Hoses

HOSE SIDE BRNR W/.079 ORIFACE

Part Number: S13470-079
Weight: 1.0

==> All Broil King Regulators and Hoses.

9576-43NZ Wheels and Castors

CASTER BRACKET 21 3/4” LONG

Part Number: 21039-911
Weight: 2.05

10892-23

Click for photos

Rubber castor, 3” w/plate, locking.

Part Number: 10892-23
Weight: 0.66

10892-285

Click for photos

CASTER 3” RUBBER W/LEG LEVEL

Part Number: 10892-285
Weight: 1.0

==> All Broil King Wheels and Castors.

9576-43NZ Warming Racks

22005-991

Click for photos

Genuine OEM Broil King warming rack. Porcelain enameled, glossy finish.

Part Number: 22005-991
Dimensions: 26 1/8” x 8 5/8”
Material: Porcelain steel
Weight: 3.10

22003-991

Click for photos

WARMING RACK (SMALLER SIDE) PORCELAIN STEEL

Part Number: 22003-991
Dimensions: 8 5/8” x 12 1/2”
Weight: 1.65

==> All Broil King Warming Racks.

9576-43NZ Heat indicators and Meat Thermometers

10571-6

Click for photos

Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

==> All Broil King Heat indicators and Meat Thermometers.

9576-43NZ Miscellaneous Repair Parts

Y-11230

Click for photos

Cotter pin

Part Number: Y-11230
Weight: 0.01

S21233

Click for photos

Hinge pin clip.

Part Number: S21233
Weight: 0.01

S21362

Click for photos

REAR BURNER SPRING

Part Number: S21362
Weight: 1.0

S21255

Click for photos

Washer

Part Number: S21255
Weight: 0.01

OVEN LIGHT *

Part Number: 25020-71
Weight: 1.0

==> All Broil King Miscellaneous Repair Parts.

9576-43NZ Hardware

Y-11231

Click for photos

LID BUMPER

Part Number: Y-11231
Weight: 0.01

SCREW-PHCP 6-32X1/4 TY-F JS500

Part Number: Y-12835
Weight: 1.0

==> All Broil King Hardware.

9576-43NZ Cart Parts

TANK BASE I/R BLACK

Part Number: 21526-371
Weight: 1.0

==> All Broil King Cart Parts.

9576-43NZ Accessories

00030

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

WB-1

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

==> All 9576-43NZ Accessories.

BBQ Part Categories

Broil King grill 9576-43NZ - Sunday, May 5 2024

Return to Broil King grill parts main page

More Broil King grill models we have parts for

9578-83 | 9578-83EU | 9578-83UK | 9578-84 | 9578-84AU | 9578-86 | 9578-86DE | 9578-87 | 9579-44 | 9579-47 | 958-22 | 958-23 | 958-24 | 958-26 | 958-27 | 958-74 | 958-77 | 958-92 | 958-93 | 958-94 | 958-96 | 958-97 | 9580-74 | 9580-77 | 9580-82DE | 9580-83CH | 9580-83EU | 9580-83IL | 9580-83UK | 9580-84 | 9580-84AU | 9580-86CH | 9580-86DE | 9580-86EU | 9580-86UK | 9580-87 | 9580-87AU | 958050 | 9582-44 | 9582-47 | 9582-83NZ | 9583-44 | 9583-47 | 9584-74AU | 9584-82 | 9584-83 | 9584-83UK | 9584-84 | 9584-86 | 9584-87 | Complete list of Broil King grill models...

*Orders for Broil King grill model 9576-43NZ $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024