Barbeques Galore EDV27-BQN (pre 2006) Grill Parts

12285-R Tube burner for Barbeques Galore model EDV27-BQN (pre 2006).
Premium quality stainless steel replacement burner. Fits older BGB30 series grills by Dynamic Cooking Systems.

Replaces original DCS part# 12285.

Part Number: DCS-12285-R (Replaces Barbeques Galore DCS-12285)
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

19014-02-R Grill Rack S/S 27 for Barbeques Galore model EDV27-BQN (pre 2006).
Premium quality heavy duty stainless steel grill rack. Our USA-made premium stainless cooking grids are simply the best obtainable.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

Fits BGA27 Professional Series gas grills by Dynamic Cooking Systems. Sometimes referred to as GRILL RACK BGA27.

• Replaces DCS factory part# 19014-02.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Sold individally.

Note: In later models, DCS changed the number of this part to 19495-01.

NOTE: Some versions of this part had grid lifter notches on all four corners, some had only one, and some had none. Our part has none. See part DCS-19014-03-R for grill rack with one notch.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 19 1/2” x 12 3/4” grill rack/cooking grid.

Part Number: DCS-19014-02-R (Replaces Barbeques Galore DCS-19014-02)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 8.0

Heat Plate/ Flame Tamer not known for Barbeques Galore model EDV27-BQN (pre 2006). Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Gas collector box assembly. Includes collector box, ceramic electrode, and wire. Fits both left and right hand side.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-33B (Replaces Barbeques Galore DCS-32801)
Weight: .05

DCS (9 Volt) 4-Prong Spark Generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB14-B (Replaces Barbeques Galore DCS-18349)
Weight: 0.40

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Barbeques Galore DCS-13230)
Dimensions: 22
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces Barbeques Galore DCS-13017)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.


Part Number: SSST
Material: stainless steel
Weight: 1.5

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

This part is currently out of stock, but more are already on the way and expected to arrive mid August

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14