Barbeques Galore EDV27-BQRL Grill Parts

304 Stainless steel 15,000 BTU infrared rotisserie burner for Barbeques Galore model EDV27-BQRL. For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces Barbeques Galore DCS-210357)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

210617-R TUBE BURNER BBQ 30 or U BURNER EDV GRILLS for Barbeques Galore model EDV27-BQRL.
Premium quality stainless steel tube burner.

FIts older BGB30 and BGC30 series grills. Relaces original DCS part# 210617.

Part Number: DCS-210617-R (Replaces Barbeques Galore DCS-210617)
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

304 Stainless steel 15,000 BTU infrared rotissierie burner for Barbeques Galore model EDV27-BQRL. For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

212427-R GRILL RACK 27D SS for Barbeques Galore model EDV27-BQRL.

Premium quality heavy duty stainless steel grill rack. Our USA-made premium stainless cooking grids are simply the best obtainable.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

Fits BG27 and EDV27 Professional Series gas grills.

• Replaces DCS factory part# 212427.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Made in USA
• Dimensions: 19 1/2” x 12 3/4”
• Sold individally.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 19 1/2” x 12 3/4” grill rack/cooking grid.

Part Number: DCS-212427-R (Replaces Barbeques Galore DCS-212427)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 8.0

Heat Plate/ Flame Tamer not known for Barbeques Galore model EDV27-BQRL. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Gas collector box assembly. Includes collector box, ceramic electrode, and wire. Fits both left and right hand side.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-33B (Replaces Barbeques Galore DCS-214293)
Weight: .05

212333-R BATTERY IGN MODULE 9V ELTEC 4.
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.

• Replaces factory part 212333
• Includes 212336 Igniter switch (button)
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-212333-R (Replaces Barbeques Galore DCS-212333)
Weight: 0.40

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Barbeques Galore DCS-210819P)
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces Barbeques Galore DCS-210733)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Maple wood chips.

• All natural wood smoke flavor
• Great for use in BBQ's or smokers.
• 170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00270
Weight: 1.3

Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.

Part Number: 43108
Dimensions: 16
Material: stainless steel
Weight: 0.10

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

• Works with both charcoal and gas grills.
• Easy to use and refill.
• Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.

Part Number: 24795
Weight: .3