Aussie 8462-6-MR1 Grill Parts

Highest quality replacement parts for your Aussie 8462-6-MR1 - Free USA shipping $49 or more* - No Sales Tax*

Aussie 8462-6-MR1 owners manual and diagrams

Diagrams & owners manual not available for grill model# 8462-6-MR1. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Aussie model: 8462-6-MR1

This page shows all of the parts we know fit model Aussie 8462-6-MR1. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Aussie grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Aussie 8462-6-MR1 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Aussie model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

8462-6-MR1 Burners

Click for photos

Cast iron burner for Aussie model 8462-6-MR1.

Part Number: CIT
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 4.2

Click for photos

Cast iron burner for Aussie model 8462-6-MR1.

Part Number: CIAU
Dimensions: 15” x 2”
Material: cast iron
Weight: 3.8

Click for photos

Cast stainless steel burner for Aussie model 8462-6-MR1. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.

NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.

Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2

==> All Aussie Burners.

8462-6-MR1 Cooking Grids

Cooking grid not known for Aussie model 8462-6-MR1. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the Aussie cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

==> All Aussie Cooking Grids.

8462-6-MR1 Heat Plates

Click for photos

Stainless steel Flame Diffuser for Aussie model 8462-6-MR1.

Part Number: AUHP1
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 1.0

Click for photos

SET OF THREE/3 PACK Stainless steel Flame Tamer for Aussie model 8462-6-MR1. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 2.7

Click for photos

SET OF FOUR/4 PACK Stainless steel Flame Tamer for Aussie model 8462-6-MR1. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X4
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 3.6

==> All Aussie Heat Plates.

8462-6-MR1 Accessories

Click for photos

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

==> All 8462-6-MR1 Accessories.

BBQ Part Categories

Aussie grill 8462-6-MR1 - Sunday, May 5 2024

Return to Aussie grills main page

More Aussie grill models we have parts for
6804S8-S11 \| 6804T8KSS1 \| 6804T8UK91 \| 6805 \| 6805-8SSS1 \| 69F6U00KS1 \| 7110.6.641 \| 7110.7.641 \| 7202 \| 7202BO-B21 \| 7202BO-M41 \| 7202KO-G21 \| 7262 \| 7262BO-B21 \| 7262BO-M21 \| 7262KO-G21 \| 7262KOXG21 \| 7302 \| 7302-0-581 \| 7302-2-581 \| 7302KO-G11 \| 7352-2-581 \| 7362 \| 7362B1XB11 \| 7362BO-B11 \| 7362BO-M11 \| 7362K3X-B11 \| 7362K3X-B41 \| 7362K6-B41 \| 7362KIXB41 \| 7362KO-B11 \| 7362KO-G11 \| 7362KOXG11 \| 7402 \| 7462 \| 7462BO-B11 \| 7462BO-M11 \| 7462K1-M11 \| 7462K3X-B11 \| 7462K3X-B41 \| 7462KO-B11 \| 7462KO-G11 \| 7662 \| 7710.8.641 \| 7710.S8.641 \| 7720.9.641 \| 7820.3.641 \| 7830 \| 7910.7.641 \| 7920.6.641 \| Complete list of Aussie grill models...

More Aussie grill models we have parts for

6804S8-S11 | 6804T8KSS1 | 6804T8UK91 | 6805 | 6805-8SSS1 | 69F6U00KS1 | 7110.6.641 | 7110.7.641 | 7202 | 7202BO-B21 | 7202BO-M41 | 7202KO-G21 | 7262 | 7262BO-B21 | 7262BO-M21 | 7262KO-G21 | 7262KOXG21 | 7302 | 7302-0-581 | 7302-2-581 | 7302KO-G11 | 7352-2-581 | 7362 | 7362B1XB11 | 7362BO-B11 | 7362BO-M11 | 7362K3X-B11 | 7362K3X-B41 | 7362K6-B41 | 7362KIXB41 | 7362KO-B11 | 7362KO-G11 | 7362KOXG11 | 7402 | 7462 | 7462BO-B11 | 7462BO-M11 | 7462K1-M11 | 7462K3X-B11 | 7462K3X-B41 | 7462KO-B11 | 7462KO-G11 | 7662 | 7710.8.641 | 7710.S8.641 | 7720.9.641 | 7820.3.641 | 7830 | 7910.7.641 | 7920.6.641 | Complete list of Aussie grill models...