Amana SS4 Grill Parts

Highest quality replacement parts for your Amana SS4 - Free USA shipping $49 or more* - No Sales Tax*

Amana SS4 owners manual and diagrams

Diagrams & owners manual not available for grill model# SS4. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Amana model: SS4

On this page you'll find all of the parts that fit model Amana SS4. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Amana grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Amana SS4 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Amana model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

SS4 Burners

AMT1

Click for photos

Stainless steel burner for Amana model SS4. Sold individually, number required varies.

Part Number: AMT1
Dimensions: 17 1/8” x 1”
Material: stainless steel
Weight: 0.6

==> All Amana Burners.

SS4 Cooking Grids

50263

Click for photos

Porcelain steel cooking grids for Amana model SS4. SET OF THREE (3).

Porcelain enameled, glossy finish
3 panels, each 17 1/2” x 8 5/8”
Total width: 25 7/8”

Part Number: 50263
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 25 7/8”
Material: porcelain steel wire
Weight: 10.8

==> All Amana Cooking Grids.

SS4 Heat Plates

AMHP1

Click for photos

Stainless Flavor Grid (heat plate/Flame Tamer) for Amana model SS4. Sold individually, number required varies.

Part Number: AMHP1
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 7/16”
Material: stainless steel
Weight: 1.0

CLA-TS0152-X3

Click for photos

SET OF THREE/3 PACK Flavor Grid, stainless steel for Amana model SS4. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 3.6

CLA-TS0152-X4

Click for photos

SET OF FOUR/4 PACK Flavor Grid, stainless steel for Amana model SS4. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 4.8

==> All Amana Heat Plates.

SS4 Igniter Components

IGEIB4-B

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

06730

Click for photos

Ceramic electrode and 40” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06730
Material: ceramic
Weight: 0.1

TS-IG4010

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

==> All Amana Igniter Components.

SS4 Accessories

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

==> All SS4 Accessories.

BBQ Part Categories

Amana grill SS4 - Sunday, May 5 2024

Return to Amana grill parts main page

More Amana grill models we have parts for
AM26LP \| AM26LP-P \| AM27LP \| AM30 \| AM30LP \| AM30LP-P \| AM33 \| AM33LP \| AM33LP-P \| SF27 \| SS5 \|

*Orders for Amana grill model SS4 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024