Grill-Parts home

Amana AM30LP Grill Parts

Amana logo

 

Amana AM30LP

 

Highest quality replacement parts for your Amana AM30LP - Free USA shipping $49 or more* - No Sales Tax*

 

Amana AM30LP owners manual and diagrams
Diagrams & owners manual not available for grill model# AM30LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for Amana model: AM30LP
On this page you'll find all of the parts that fit model Amana AM30LP. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Amana grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Amana AM30LP BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Amana model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


AM30LP Burners

FCTG2608013 / AMT1
Click for photos
Stainless steel burner for Amana model AM30LP. Sold individually, number required varies.

Part Number: AMT1 (Replaces Amana FCTG2608013)
Dimensions: 17 1/8” x 1”
Material: stainless steel
Weight: 0.6

$37.68
 

==> All Amana Burners.
 





AM30LP Cooking Grids

FCTG2908009 / 50263
Click for photos
Porcelain steel cooking grids for Amana model AM30LP. SET OF THREE (3).
  • Porcelain enameled, glossy finish
  • 3 panels, each 17 1/2” x 8 5/8”
  • Total width: 25 7/8”


Part Number: 50263 (Replaces Amana FCTG2908009)
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 25 7/8”
Material: porcelain steel wire
Weight: 10.8

$89.26
 

53S33
Click for photos
Stainless steel cooking grids with solid 1/4” rods (set of 3) for Amana model AM30LP.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

$194.98
 

==> All Amana Cooking Grids.
 





AM30LP Heat Plates

CLA-TS0152-X3
Click for photos
SET OF THREE/3 PACK Flavor Grid, stainless steel for Amana model AM30LP. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 3.6

$67.17
 

CLA-TS0152-X4
Click for photos
SET OF FOUR/4 PACK Flavor Grid, stainless steel for Amana model AM30LP. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 4.8

$84.24
 

FCTG2908026 / AMHP1
Click for photos
Stainless Flavor Grid (heat plate/Flame Tamer) for Amana model AM30LP. Sold individually, number required varies.

Part Number: AMHP1 (Replaces Amana FCTG2908026)
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 7/16”
Material: stainless steel
Weight: 1.0

$24.70
 

==> All Amana Heat Plates.
 





AM30LP Igniter Components

06730
Click for photos
Ceramic electrode and 40” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 06730
Material: ceramic
Weight: 0.1

$9.25
 

10342-T12
Click for photos
21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

$4.21
 

IG-25B
Click for photos
Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.
  • Sold individually, two (2) required
  • Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-25B
Weight: 0.3

$13.40
 

IGEIB6-B
Click for photos
Battery powered push button igniter.
  • Has six (6) spade type male connectors.
  • Uses 1 AA battery (not supplied)
  • Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB6-B
Weight: 0.3

$34.11
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

==> All Amana Igniter Components.
 





AM30LP Heat indicators and Meat Thermometers

FCCS0007030 / 00013
Click for photos
heat indicator

Part Number: 00013 (Replaces Amana FCCS0007030)
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2

$18.21
 

==> All Amana Heat indicators and Meat Thermometers.
 





AM30LP Accessories

00220
Click for photos
GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

$6.87
 

40259
Click for photos
15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92
 

SR-7B
Click for photos
Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long.

Part Number: SR-7B
Dimensions: 19 1/2
Material: chrome steel
Weight: 1.0

$14.27
 

14913
Click for photos

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.



Part Number: 14913
Material: stailess steel
Weight: 0.5

$14.41
 

50426
Click for photos
Aluminum foil grilling trays. Package of three.
  • Heavy duty aluminum foil
  • Re-usable
  • Great for grilling delicate foods like fish and veggies


Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64
 

SDDPS
Click for photos
Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

$18.07
 

==> All AM30LP Accessories.
 



BBQ Part Categories










 
 

Amana grill AM30LP - Tuesday, May 12 2026

Return to Amana grill parts main page



More Amana grill models we have parts for
AM26LP | AM26LP-P | AM27LP | AM30 | AM30LP-P | AM33 | AM33LP | AM33LP-P | SF27 | SS4 | SS5 |



*Orders for Amana grill model AM30LP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026