Academy Sports BQ06042-1 Grill Parts

304 Stainless steel infrared rear rotisserie burner with ceramic wafer for Academy Sports model BQ06042-1. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 that can be drilled for LP gas or natural gas.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

Stainless steel burner for Academy Sports model BQ06042-1.

Part Number: SCTB2
Dimensions: 15 1/2” x 4 3/4”
Material: stainless steel
Weight: 1.0

Stainless steel burner support bracket. Made in USA

Part Number: CLA-MS0109
Dimensions: 31 3/4
Material: stainless steel
Weight: 3.0

Stainless steel cooking grids (set of 3) for Academy Sports model BQ06042-1.

Part Number: 5S463
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 30 3/4”
Material: stainless steel tubes
Weight: 9.0

Cast iron cooking grid for Academy Sports model BQ06042-1. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-70P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2

Cast iron cooking grid for Academy Sports model BQ06042-1. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

SET OF THREE/3 PACK Stainless steel heat diffuser for Academy Sports model BQ06042-1. On some grill models it is also known as a Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

Stainless steel heat plate for Academy Sports model BQ06042-1.

Part Number: SCHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/8”
Material: stainless steel
Weight: 1.3

Smoker drawer kit assembly. This aftermarket part replaces the drawer and includes the following:

• Drawer with handle
• Drawer cover
• Mounting hardware and instructions
• Made in USA

WARNING: Before you order this part, please verify it can be used in your gas grill; refer to the dimensions and measure the space allowed in your grill. This smoker drawer kit does not fit into all grills. We know it fits four brand names/six model numbers. Please refer to our Return Policy.

Part Number: CLA-MS0166KIT
Dimensions: 18 1/4” x 3 3/4”
Material: stainless steel
Weight: 2.1

Stainless steel grease tray. The front-to-back dimension of 17 1/4” does not include the handle. With the handle included, the overall dimension is 18”. Made in USA

Part Number: CLA-DS0184
Dimensions: 17 1/4” x 26 5/8”
Material: stainless steel
Weight: 5.2

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Cherry wood chips.

• All natural wood smoke flavor
• Great for use in BBQ's or smokers.
• 170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00240
Weight: 1.14

2 in 1 chrome plated turner / tong with PVC coated handle

Part Number: 40730
Dimensions: 14
Material: chrome steel
Weight: 0.6

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.


Part Number: RR-2
Material: chrome steel
Weight: 1.0

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3