Academy Sports BQ05046-6-A Grill Parts

Highest quality replacement parts for your Academy Sports BQ05046-6-A - Free USA shipping $49 or more* - No Sales Tax*

Academy Sports BQ05046-6-A owners manual and diagrams

Diagrams & owners manual not available for grill model# BQ05046-6-A. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Academy Sports model: BQ05046-6-A

On this page you'll find all of the parts that fit model Academy Sports BQ05046-6-A. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a cooking grid and there are none here, click the cooking grids button to see all of the cooking grids we have for Academy Sports grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Academy Sports BQ05046-6-A BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Academy Sports model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

BQ05046-6-A Burners

CLA-BL0229

Click for photos

304 Stainless steel infrared rear rotisserie burner with ceramic wafer for Academy Sports model BQ05046-6-A. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 that can be drilled for LP gas or natural gas.

Dimensions:

Maximum overall length, including mounting tab on one end: 17”
Maximum width: 3 3/8”
Burner box 15 3/8” x 3 3/8”
Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

SCTB2

Click for photos

Stainless steel burner for Academy Sports model BQ05046-6-A.

Part Number: SCTB2
Dimensions: 15 1/2” x 4 3/4”
Material: stainless steel
Weight: 1.0

==> All Academy Sports Burners.

BQ05046-6-A Burner Brackets and Carryovers

CLA-MS0109

Click for photos

Stainless steel burner support bracket. Made in USA

Part Number: CLA-MS0109
Dimensions: 31 3/4
Material: stainless steel
Weight: 3.0

==> All Academy Sports Burner Brackets and Carryovers.

BQ05046-6-A Cooking Grids

5S463

Click for photos

Stainless steel cooking grids (set of 3) for Academy Sports model BQ05046-6-A.

Part Number: 5S463
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 30 3/4”
Material: stainless steel tubes
Weight: 9.0

CG-70P-CI

Click for photos

Cast iron cooking grid for Academy Sports model BQ05046-6-A. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-70P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2

CG-72P-CI

Click for photos

Cast iron cooking grid for Academy Sports model BQ05046-6-A. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

==> All Academy Sports Cooking Grids.

BQ05046-6-A Heat Plates

CLA-TS0151-X3

Click for photos

SET OF THREE/3 PACK Stainless steel heat diffuser for Academy Sports model BQ05046-6-A. On some grill models it is also known as a Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

SCHP2

Click for photos

Stainless steel heat plate for Academy Sports model BQ05046-6-A.

Part Number: SCHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/8”
Material: stainless steel
Weight: 1.3

==> All Academy Sports Heat Plates.

BQ05046-6-A Smoker Trays

CLA-MS0166KIT

Click for photos

Smoker drawer kit assembly. This aftermarket part replaces the drawer and includes the following:

Drawer with handle
Drawer cover
Mounting hardware and instructions
Made in USA

WARNING: Before you order this part, please verify it can be used in your gas grill; refer to the dimensions and measure the space allowed in your grill. This smoker drawer kit does not fit into all grills. We know it fits four brand names/six model numbers. Please refer to our Return Policy.

Part Number: CLA-MS0166KIT
Dimensions: 18 1/4” x 3 3/4”
Material: stainless steel
Weight: 2.1

==> All Academy Sports Smoker Trays.

BQ05046-6-A Valves, Orifices, and Manifolds

CLA-VB0245

Click for photos

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

==> All Academy Sports Valves, Orifices, and Manifolds.

BQ05046-6-A Rotisserie components

RO-4

Click for photos

Universal durable battery operated rotisserie motor. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included).

Part Number: RO-4
Weight: 1.0

==> All Academy Sports Rotisserie components.

BQ05046-6-A Accessories

00220

Click for photos

GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

40259

Click for photos

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

00185

Click for photos

Part Number: 00185
Material: stainless
Weight: .3

14913

Click for photos

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

CGT

Click for photos

Cannon Grill Towel.

Part Number: CGT
Dimensions: 16” x 25”
Weight: 0.30

==> All BQ05046-6-A Accessories.

BBQ Part Categories

Academy Sports BQ05046-6-A -Tuesday, May 12 2026

Return to Academy Sports grills main page

More Academy Sports grill models we have parts for

GR2215101-OG-00 | GR2215120-OG-00 | GR2323101-OG-00 | M6G-124 | Q22-266A | SRGG21101 | SRGG30001C | SRGG30001D | SRGG30004 | SRGG31403 | SRGG41006A | SRGG51103 | SRGG51103A | SRGG51112 | SRGG51112A | SRGG51204A | SRGG51608-19 | SRGG61003 | SRPG1813 | TG2021502-OG | TG2036701-OG | TG431 | 810-1525-0 | 810-9419-1 | 810-9620-0 | B070E4-A | B09LB1-32 | B09LB1-32-4 | B09SMG1-3F | B10SMG1-3F | B10SR10-C | BQ04022 | BQ04024 | BQ05037-2 | BQ05046-6 | BQ05085-1 | BQ06042-1 | BQ06043-1 | BQ06W03-1 | BQ06W03-1-N | BQ06W06-A | BQ06W1B | BQ06W1C-A | BQ06WIC | BQ51004 | CG3023B | CG3023E | DLX2012 | DLX2013 | Complete list of Academy Sports grill models...

*Orders for Academy Sports grill model BQ05046-6-A $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026