Weber Genesis 1000 Grill Parts

Highest quality replacement parts for your Weber Genesis 1000 - Free USA shipping $49 or more* - No Sales Tax*

Weber Genesis 1000 owners manual and diagrams

Diagrams & owners manual not available for grill model# Genesis 1000. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Weber model: Genesis 1000

On this page you'll find all of the parts that fit model Weber Genesis 1000. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Weber grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Weber Genesis 1000 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Weber model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

Genesis 1000 Burners

WTB-F

Click for photos

Stainless steel front or rear burner for Weber Genesis I-IV for Weber model Genesis 1000. See part# WTB1 for complete burner kit.

Part Number: WTB-F
Dimensions: 29 1/8”
Material: stainless steel
Weight: 1.2

WTB1

Click for photos

Complete stainless steel burner assembly kit for Weber Genesis I-IV for Weber model Genesis 1000.

Includes:

Two (2) part# WTB-F 29 1/8” front and rear burners
One (1) part# WTB-C 28 3/8” center burner
One (1) WTB-CT 13 1/2” cross-over tube.

Part Number: WTB1
Material: stainless steel
Weight: 3.0

WTB-CT

Click for photos

Stainless steel cross-over tube for Weber model Genesis 1000. See part# WTB1 for complete burner kit.

Part Number: WTB-CT
Dimensions: 13 1/2”
Material: stainless steel
Weight: 0.13

WTB-C

Click for photos

Stainless steel center burner for Weber Genesis I-IV for Weber model Genesis 1000. See part# WTB1 for complete burner kit.

Part Number: WTB-C
Dimensions: 29 1/8”
Material: stainless steel
Weight: 1.0

==> All Weber Burners.

Genesis 1000 Cooking Grids

CG-85SSET

Click for photos

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel for Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700 for Weber model Genesis 1000. Channel formed means rolled steel stamped into a U-shape; is not solid round rods.

Part Number: CG-85SSET
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 5.45

CG-57P-CI-X2

Click for photos

Cast iron cooking grids for Weber model Genesis 1000. SET OF TWO (2). Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-57P-CI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 14.7

==> All Weber Cooking Grids.

Genesis 1000 Heat Plates

99813

Click for photos

Porcelain steel Flavorisor Bars for Weber for Weber model Genesis 1000. Set of thirteen pieces. (5) at 23 3/8”, (8) at 15 7/8”

Part Number: 99813
Dimension Front-to-Back: 23 3/8”
Dimension Side-to-Side: 15 7/8”
Material: porcelain steel
Weight: 12.6

==> All Weber Heat Plates.

Genesis 1000 Igniter Components

UP-9B

Click for photos

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

UP-10B

Click for photos

Snap-in piezo ignitor kit. Fits Weber Genesis Silver A and B 2002-2004, and Newer Spirit E310 & E320. Also fits many other Weber mododels that use a snap-in ignitor instead of a threaded part. Includes

UP-9B Snap-in push-button piezo ignitor
IG-13B Collector box, electrode, and 19 1/2” wire assembly

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-10B
Weight: 0.5

UP-11B

Click for photos

Threaded piezo ignitor kit. Fits Genesis Silver B & C, Genesis 1000-5000, Spirit 700-900, and other Weber models that use a threaded ignitor instead of a snap-in. Includes:

UP-7B Threaded push-button piezo ignitor with external grounding tab
IG-13B Collector box, electrode, and wire assembly

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-11B
Weight: 0.5

UP-7B

Click for photos

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-7B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

==> All Weber Igniter Components.

Genesis 1000 Knobs and Handles

WH-4B

Click for photos

Hardwood replacement handle for some Weber grills. Total length 24 7/8” x 1 9/16”. Has two 1” slotted mounting holes for ”wiggle room” with center to center about 23 1/8”. (Hardware not included.)

Part Number: WH-4B
Dimensions: 24 7/8
Material: wood
Weight: .60

00120

Click for photos

Control knob with long shaft.

Off position D-Value: 6 o'clock
Knob diameter: 1 5/8”
Socket diameter: 8mm
Knob shaft: 1 1/4”

Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1

==> All Weber Knobs and Handles.

Genesis 1000 Warming Racks

AP-WEBCR

Click for photos

All purpose chrome/nickel plated cradle style warming rack. Total length is 24 5/16”. Length of actual rack is 23”.

Part Number: AP-WEBCR
Dimensions: 4” x 24 5/16”
Material: Chrome steel
Weight: 1.5

==> All Weber Warming Racks.

Genesis 1000 Valves, Orifices, and Manifolds

Single LP gas valve.

Part Number: VLV-35
Material: Brass
Weight: 0.30

==> All Weber Valves, Orifices, and Manifolds.

Genesis 1000 Rotisserie components

RO-6

Click for photos

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

==> All Weber Rotisserie components.

Genesis 1000 Accessories

00215

Click for photos

GrillPro Wood chips from genuine oak whiskey barrels.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

40240

Click for photos

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Dimensions: 16” x 4”
Material: chrome steel
Weight: 0.9

11040

Click for photos

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

Ideal for searving or grilling appetizers
Wide end for easy handling

Part Number: 11040
Dimensions: 7
Weight: 0.4

14950

Click for photos

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

90963

Click for photos

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.2

==> All Genesis 1000 Accessories.

BBQ Part Categories

Weber model Genesis 1000 - Tuesday, May 12 2026

Return to Weber grill parts main page

More Weber grill models we have parts for

Summit Platinum A6 | Summit Platinum A6 NG | Summit Platinum B4 | Summit Platinum B4 NG | Summit Platinum B6 | Summit Platinum B6 NG | Summit Platinum C4 | Summit Platinum C4 NG | Summit Platinum D4 | Summit Platinum D4 NG | Summit Platinum D6 | Summit Platinum D6 NG | Summit S-420 | Summit S-440 | Summit S-450 | Summit S-460 | Summit S-470 | Summit S-620 | Summit S-640 | Summit S-650 | Summit S-660 | Summit S-670 | Summit Silver A | Summit Silver A NG | Summit Silver B | Summit Silver B NG | Summit Silver C | Summit Silver C NG | Summit Silver D | Summit Silver D NG | 101001 Gas Kettle | 1100 | 161001 | 1710001 | 1711001 | 1730501 | 1740001 | 1741001 | 1741301 | 1742001 | 1750001 | 1751001 | 1780001 | 1781001 | 1810001 | 1811001 | 1830501 | 1840001 | 1841001 | 1841301 | Complete list of Weber grill models...

*Orders for Weber grill model Genesis 1000 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026