Weber 6831411 Grill Parts

Stainless steel front or rear burner for Weber Silver B and C grills for Weber model 6831411. Also, 2002 and newer Gold models. See part# WTB2 for complete burner kit.

Part Number: WTB-SBCF
Dimensions: 28 1/8”
Material: stainless steel
Weight: 1.0

Complete stainless steel burner assembly kit for Weber Silver B and C models, and 2002 and newer Gold models for Weber model 6831411.

Includes:

• Two (2) part# WTB-SBCF 28” front and rear burners
• One (1) part# WTB-SBCC 27 3/8” center burner
• One (1) WTB-CCT 12 3/4” cross-over tube.

Part Number: WTB2
Material: stainless steel
Weight: 3.0

Stainless steel center burner for Weber Silver B and C grills for Weber model 6831411. Also 2002 and later GOld models. See part# WTB2 for complete burner kit.

Part Number: WTB-SBCC
Dimensions: 27 3/8”
Material: stainless steel
Weight: 1.0

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel for Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700 for Weber model 6831411. Channel formed means rolled steel stamped into a U-shape; is not solid round rods.

Part Number: CG-85SSET
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 5.45

Cast iron cooking grids for Weber model 6831411. SET OF TWO (2). Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-57P-CI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 14.7

Heavy gauge stainless steel flavor bars for Weber Silver B and C models, and Spirit 700 model grills using a 5 bar system for Weber model 6831411. Set of 5.

Part Number: WFB-5M
Dimension Front-to-Back: ”
Dimension Side-to-Side: 22 9/16”
Material: stainless steel
Weight: 6.8

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-7B
Weight: 0.3

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

Control knob with long shaft.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 8mm
• Knob shaft: 1 1/4”

Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1

Chrome steel warming rack. This part is 25 3/16” at is absolute longest. The rack itself is 24”.

Part Number: 02347
Dimensions: 25 3/16” x 3 11/16”
Material: chrome steel wire
Weight: 2.0

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

Hickory flavor wood chunks. 4 lbs.
Note package erroneously states quantity at 5lbs.

Part Number: 00221
Weight: 4.2

5-piece unique tennis oriented utensil set. Constructed of heavy stainless steel with ”tennis grips” on each utensil. Includes yellow tennis ball style salt & pepper shakers, along with spatula, fork and tong.

Makes a nice gift.for tennis-minded folks

Part Number: US10
Weight: 5.00

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0