Weber 2291699 Grill Parts

Stainless steel front or rear burner for Weber Silver B and C grills for Weber model 2291699. Also, 2002 and newer Gold models. See part# WTB2 for complete burner kit.

Part Number: WTB-SBCF
Dimensions: 28 1/8”
Material: stainless steel
Weight: 1.0

Complete stainless steel burner assembly kit for Weber Silver B and C models, and 2002 and newer Gold models for Weber model 2291699.

Includes:

• Two (2) part# WTB-SBCF 28” front and rear burners
• One (1) part# WTB-SBCC 27 3/8” center burner
• One (1) WTB-CCT 12 3/4” cross-over tube.

Part Number: WTB2
Material: stainless steel
Weight: 3.0

Stainless steel center burner for Weber Silver B and C grills for Weber model 2291699. Also 2002 and later GOld models. See part# WTB2 for complete burner kit.

Part Number: WTB-SBCC
Dimensions: 27 3/8”
Material: stainless steel
Weight: 1.0

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel for Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700 for Weber model 2291699. Channel formed means rolled steel stamped into a U-shape; is not solid round rods.

Part Number: CG-85SSET
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 5.45

Cast iron cooking grids for Weber model 2291699. SET OF TWO (2). Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-57P-CI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 14.7

Heavy gauge stainless steel flavor bars for Weber Silver B and C models, and Spirit 700 model grills using a 5 bar system for Weber model 2291699. Set of 5.

Part Number: WFB-5M
Dimension Front-to-Back: ”
Dimension Side-to-Side: 22 9/16”
Material: stainless steel
Weight: 6.8

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-7B
Weight: 0.3

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Control knob with long shaft.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 8mm
• Knob shaft: 1 1/4”

Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1

Chrome steel warming rack. This part is 25 3/16” at is absolute longest. The rack itself is 24”.

Part Number: 02347
Dimensions: 25 3/16” x 3 11/16”
Material: chrome steel wire
Weight: 2.0

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

• Ideal for searving or grilling appetizers
• Wide end for easy handling

Part Number: 11040
Dimensions: 7
Weight: 0.4

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30