Warm Morning G-3 EXPL Grill Parts

Bow-tie burner and single venturi kit; includes gasket and screws for Warm Morning model G-3 EXPL. Also known as part number DPP1. (Fits G1000EX and G3EX, single venturi.)

Part Number: B100247
Material: Stainless steel
Weight: 2.40

two venturi gaskets with screws

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

Cooking Grid Stainless Steel Warm Morning G3 for Warm Morning model G-3 EXPL.

Part Number: CG-20SS
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 8 3/8”
Material: stainless steel
Weight: 4.00

Cast iron ”water fall style/mutliple level” cooking grids (set of 3) for Warm Morning model G-3 EXPL.

Part Number: 62503
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 25 1/8”
Material: cast iron
Weight: 21.10

Premium quality stainless steel cooking grids for Warm Morning model G-3 EXPL. SET OF THREE (3). Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• .225 diameter solid stainless rods

• Each panel measures 16 7/8” x 8 3/8”
• Overall dimensions: 16 7/8” x 25 1/8”

.

Part Number: CG-20SS-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 25 1/8”
Material: stainless steel
Weight: 12.00

Rock grate for holding lava rock or ceramic briquettes.

Part Number: BG-16
Dimension Front-to-Back: 13 1/8”
Dimension Side-to-Side: 23 3/4”
Material: carbon steel
Weight: 4.2

Heat Plate/ Flame Tamer not known for Warm Morning model G-3 EXPL. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Aluminized steel radiation shield for G3, G3TX, S3, and U3. See part RSGSS for high quality stainless version of this part.

Part Number: RSG3
Dimensions: 8” x 16 3/4”
Material: aluminized steel
Weight: 2.0

Aluminized steel radiation shield. Installs below burner in some Amberlight, TEMCO, Charbroil, and Broilmaster models.

Part Number: 00600
Dimensions: 8” x 16 3/4”
Material: Aluminized steel
Weight: 1.8

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65

BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA.

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

Polished stainless steel turner with an ergonomic soft grip grey handle and red accents.

Part Number: 43108
Dimensions: 16
Material: stainless steel
Weight: 0.10

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Material: porcelain steel
Weight: 1.0

Stainless Steel Ash Cleaning Tray For Use In Ceramic Kamado Grills

Part Number: BRACT
Weight: 1.0