Grill-Parts home

Sunbeam D3534 Grill Parts

Sunbeam logo

 

 

Highest quality replacement parts for your Sunbeam D3534 - Free USA shipping $49 or more* - No Sales Tax*

 

Sunbeam D3534 owners manual and diagrams
Diagrams & owners manual not available for grill model# D3534. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts to fit Sunbeam model: D3534
This page shows all of the parts we know fit model Sunbeam D3534. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Sunbeam grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Sunbeam D3534 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Sunbeam model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


D3534 Venturis

00400
Click for photos
two venturi gaskets with screws

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

$5.31
 

SHK4
Click for photos
Single Gasket Kit Economy Burners

Part Number: SHK4
Weight: 0.01

$4.16
 

SG-B
Click for photos
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

$7.65
 

==> All Sunbeam Venturis.
 





D3534 Cooking Grids

CG-50SS
Click for photos
Cooking Grid Stainless Steel Prochef for Sunbeam model D3534.

Part Number: CG-50SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.80

$48.80
 

CG-50SS-X2
Click for photos
Premium quality stainless steel cooking grids for Sunbeam model D3534. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • .225 diameter solid stainless rods
  • Each panel measures 14 1/2” x 10 1/2”
  • Overall dimensions: 14 1/2” x 21”
.

Part Number: CG-50SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6

$88.24
 

CG-53SS
Click for photos
Commercial 304 grade stainless steel cooking grid with 1/4” diameter rods for Sunbeam model D3534. Sold individually. Made in USA.

Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5

$72.33
 

==> All Sunbeam Cooking Grids.
 





D3534 Rock/Briquette Grates

BG-43
Click for photos
Rock grate for holding lava rock or ceramic briquettes.

Part Number: BG-43
Dimension Front-to-Back: 12 1/2”
Dimension Side-to-Side: 20 3/16”
Material: carbon steel
Weight: 3.6

$32.29
 

==> All Sunbeam Rock/Briquette Grates.
 





D3534 Heat Plates

Heat Plate/ Flame Tamer not known for Sunbeam model D3534. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0
==> All Sunbeam Heat Plates.
 





D3534 Igniter Components

03750
Click for photos
20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03750
Dimensions: 1/16
Weight: 0.05

$6.01
 

03751
Click for photos
Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03751
Weight: 0.05

$3.98
 

05152
Click for photos
OEM style collector box.
  • Bolts onto burner with venturi
  • Used with burners 11502, 15102, 15202, and 15402
  • Use original electrode; replacement electrode # 04510 has been discontinued

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 05152
Material: stainless steel
Weight: 0.1

$6.20
 

IG-5B
Click for photos
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-5B
Weight: 0.3

$11.39
 

10342-T14
Click for photos
21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

$4.32
 

IG-7B
Click for photos
20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-7B
Weight: 0.02

$4.75
 

IG-11B
Click for photos
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
    Includes:
  • Gas collector box
  • Ceramic electrode and wire
  • Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-11B
Weight: 0.3

$9.74
 

==> All Sunbeam Igniter Components.
 





D3534 Valves, Orifices, and Manifolds

Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock

Part Number: 37400
Material: brass
Weight: 0.3

$26.66
 

==> All Sunbeam Valves, Orifices, and Manifolds.
 





D3534 Accessories

45887
Click for photos
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.95
 

00281
Click for photos
Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

$12.67
 

44070
Click for photos
Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.



Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16
 

40538
Click for photos
Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

$15.59
 

BB-5
Click for photos
Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

$9.36
 

98130
Click for photos
Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Dimensions: 11
Material: porcelain steel
Weight: 1.0

$19.15
 

CGT
Click for photos
Cannon Grill Towel.

Part Number: CGT
Dimensions: 16” x 25”
Weight: 0.30

$20.58
 

==> All D3534 Accessories.
 



BBQ Part Categories













 
 

Sunbeam D3534 -Tuesday, May 12 2026

Return to Sunbeam grills main page



More Sunbeam grill models we have parts for
ST7521EPB | ST7521YPB | ST7521YPBX | ST7522RPB | ST9622SPBX | SUN1 | SUN1 Canadian | SUN1A | SUN1A Canadian | SUN1B | SUN1B Canadian | SUN2 | SUN3 | SUN3 Canadian | SUN315-7 | SUN317-7 | SUN326 | SUN326-7 | SUN349 | SUN349-7 | SUN365-7 | SUN37600 | SUN386-7 | SUN38600 | SUN400 | SUN402 | SUN405 | SUN410 | SUN415 | SUN415 Canadian | SUN415-7 | SUN420 | SUN420 Canadian | SUN425 | SUN425 Canadian | SUN426 | SUN426 Canadian | SUN426-7 | SUN435 | SUN435 Canadian | SUN445 | SUN445 Canadian | SUN449 | SUN449 Canadian | SUN449-7 | SUN450 | SUN450 Canadian | SUN451 | SUN451 Canadian | SUN455 | Complete list of Sunbeam grill models...



*Orders for Sunbeam grill model D3534 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026