Grill-Parts home

Sunbeam 47B59-2 Grill Parts

Sunbeam logo

 

 

Highest quality replacement parts for your Sunbeam 47B59-2 - Free USA shipping $49 or more* - No Sales Tax*

 

Sunbeam 47B59-2 owners manual and diagrams
Diagrams & owners manual not available for grill model# 47B59-2. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement BBQ grill parts for Sunbeam model: 47B59-2
All of the parts we have for Sunbeam 47B59-2 are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Sunbeam grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Sunbeam 47B59-2 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Sunbeam model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


47B59-2 Venturis

00400
Click for photos
two venturi gaskets with screws

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

$5.31
 

SHK4
Click for photos
Single Gasket Kit Economy Burners

Part Number: SHK4
Weight: 0.01

$4.16
 

SG-B
Click for photos
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

$7.65
 

==> All Sunbeam Venturis.
 





47B59-2 Cooking Grids

CG-50SS
Click for photos
Cooking Grid Stainless Steel Prochef for Sunbeam model 47B59-2.

Part Number: CG-50SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.80

$48.80
 

CG-50SS-X2
Click for photos
Premium quality stainless steel cooking grids for Sunbeam model 47B59-2. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • .225 diameter solid stainless rods
  • Each panel measures 14 1/2” x 10 1/2”
  • Overall dimensions: 14 1/2” x 21”
.

Part Number: CG-50SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6

$88.24
 

CG-53SS
Click for photos
Commercial 304 grade stainless steel cooking grid with 1/4” diameter rods for Sunbeam model 47B59-2. Sold individually. Made in USA.

Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5

$72.33
 

==> All Sunbeam Cooking Grids.
 





47B59-2 Rock/Briquette Grates

BG-43
Click for photos
Rock grate for holding lava rock or ceramic briquettes.

Part Number: BG-43
Dimension Front-to-Back: 12 1/2”
Dimension Side-to-Side: 20 3/16”
Material: carbon steel
Weight: 3.6

$32.29
 

==> All Sunbeam Rock/Briquette Grates.
 





47B59-2 Heat Plates

Heat Plate/ Flame Tamer not known for Sunbeam model 47B59-2. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0
==> All Sunbeam Heat Plates.
 





47B59-2 Igniter Components

03750
Click for photos
20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03750
Dimensions: 1/16
Weight: 0.05

$6.01
 

03751
Click for photos
Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03751
Weight: 0.05

$3.98
 

05152
Click for photos
OEM style collector box.
  • Bolts onto burner with venturi
  • Used with burners 11502, 15102, 15202, and 15402
  • Use original electrode; replacement electrode # 04510 has been discontinued

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 05152
Material: stainless steel
Weight: 0.1

$6.20
 

IG-5B
Click for photos
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-5B
Weight: 0.3

$11.39
 

10342-T14
Click for photos
21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

$4.32
 

IG-7B
Click for photos
20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-7B
Weight: 0.02

$4.75
 

IG-11B
Click for photos
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
    Includes:
  • Gas collector box
  • Ceramic electrode and wire
  • Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-11B
Weight: 0.3

$9.74
 

==> All Sunbeam Igniter Components.
 





47B59-2 Valves, Orifices, and Manifolds

Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock

Part Number: 37400
Material: brass
Weight: 0.3

$26.66
 

==> All Sunbeam Valves, Orifices, and Manifolds.
 





47B59-2 Rotisserie components

RO-6
Click for photos
Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

$85.09
 

==> All Sunbeam Rotisserie components.
 





47B59-2 Accessories

45887
Click for photos
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.95
 

00230
Click for photos
Apple wood chips.
  • All natural wood smoke flavor
  • Great for use in BBQ's or smokers.
  • 170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00230
Weight: 2.0

$8.47
 

40269
Click for photos
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

$21.26
 

41338
Click for photos
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60
 

14950
Click for photos
Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41
 

BRGG
Click for photos
Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

$20.11
 

==> All 47B59-2 Accessories.
 



BBQ Part Categories













 
 

Sunbeam gas grill 47B59-2 - Tuesday, May 12 2026

Return to Sunbeam grill parts main page



More Sunbeam grill models we have parts for
9481 series | 9482 | 9482 series | 9483 | 9483 series | 9490 | 9490 series | 9491 | 9491-M | 9492 | 9492 series | 9493 | 9493 series | 9494 | 9495 | 95401 | 9559 series | 9560N | 9560N-1 | 9569 series | 9649 | 9659 series | 9669 series | 9689 | 9768 | 9768 series | 9769 | 9789S-0 | 9789S-1 | A2101 | A2401 | A240E | A240E-5 | A240E8 | A240F | A240F-5 | A240H | A240K | A240K5 | A240L | A240N | A240N-5 | A240W-5 | A240X | A241C | A2421 | A2422 | A242C | A2431 | A243AT-5 | Complete list of Sunbeam grill models...



*Orders for Sunbeam grill model 47B59-2 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026