S.R. Potten CG8400NG Grill Parts

Highest quality replacement parts for your S.R. Potten CG8400NG - Free USA shipping $49 or more* - No Sales Tax*

S.R. Potten CG8400NG owners manual and diagrams

Diagrams & owners manual not available for grill model# CG8400NG. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the S.R. Potten model: CG8400NG

All of the parts we have for S.R. Potten CG8400NG are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for S.R. Potten grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct S.R. Potten CG8400NG BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your S.R. Potten model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CG8400NG Burners

SCTB3

Click for photos

Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for S.R. Potten model CG8400NG.

Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

SCTB5

Click for photos

Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for S.R. Potten model CG8400NG.

Part Number: SCTB5
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All S.R. Potten Burners.

CG8400NG Cooking Grids

506S3

Click for photos

Stainless steel cooking grid set for S.R. Potten model CG8400NG.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All S.R. Potten Cooking Grids.

CG8400NG Heat Plates

CLA-TS0314

Click for photos

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for S.R. Potten model CG8400NG. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

SCHP4

Click for photos

Stainless steel heat plate; also referred to as a flame tamer and savor plate for S.R. Potten model CG8400NG.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

==> All S.R. Potten Heat Plates.

CG8400NG Igniter Components

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B
Weight: 0.11

IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All S.R. Potten Igniter Components.

CG8400NG Accessories

00281

Click for photos

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

44070

Click for photos

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

41338

Click for photos

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

RR-3

Click for photos

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

WB-7

Click for photos

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All CG8400NG Accessories.

BBQ Part Categories

S.R. Potten grill model CG8400NG - Tuesday, May 12 2026

Return to S.R. Potten grills main page

More S.R. Potten grill models we have parts for

SS54 | SS54-LP | SS60884 | SS60884LP | SS60884NG | SS62884LP | SS62884NG | SS64-B | SS64-B-NG | SS64-LP | SS64-NG | SS706 | SS706-108 | SS72-B | SS72-LP | SS72-NG | SS73 | X1960 | B-5008 | B-8800 | B2618-SB | B5016-SB | BG2503-B | BG2503-R | BG2503-SS | BIG-8116 | BM1155 | BM1186 | BM2012 | BM42 | BM584 | BM584LP | BM584NG | BM616 | BM616-NG | BM64 | BM64-B | BM72 | BM72-B | BM72-B-NG | BM729 | BM729-NG | BM72LP | BM72NG | BM73 | BM7500 | BM84LP | BM84NG | BM85096 | BM90 | Complete list of S.R. Potten grill models...

*Orders for S.R. Potten grill model CG8400NG $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026