Patio Range CG7200LP Grill Parts

Highest quality replacement parts for your Patio Range CG7200LP - Free USA shipping $49 or more* - No Sales Tax*

Patio Range CG7200LP owners manual and diagrams

Diagrams & owners manual not available for grill model# CG7200LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Patio Range model: CG7200LP

On this page you'll find all of the parts that fit model Patio Range CG7200LP. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Patio Range grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Patio Range CG7200LP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Patio Range model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CG7200LP Burners

SCTB3

Click for photos

Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for Patio Range model CG7200LP.

Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

SCTB5

Click for photos

Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for Patio Range model CG7200LP.

Part Number: SCTB5
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All Patio Range Burners.

CG7200LP Cooking Grids

506S3

Click for photos

Stainless steel cooking grid set for Patio Range model CG7200LP.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All Patio Range Cooking Grids.

CG7200LP Heat Plates

CLA-TS0314

Click for photos

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Patio Range model CG7200LP. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

SCHP4

Click for photos

Stainless steel heat plate; also referred to as a flame tamer and savor plate for Patio Range model CG7200LP.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

==> All Patio Range Heat Plates.

CG7200LP Igniter Components

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B
Weight: 0.11

IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Patio Range Igniter Components.

CG7200LP Accessories

00270

Click for photos

Maple wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00270
Weight: 1.3

43108

Click for photos

Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.

Part Number: 43108
Dimensions: 16
Material: stainless steel
Weight: 0.10

11040

Click for photos

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

Ideal for searving or grilling appetizers
Wide end for easy handling

Part Number: 11040
Dimensions: 7
Weight: 0.4

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

RR-3

Click for photos

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

SDDPS

Click for photos

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

==> All CG7200LP Accessories.

BBQ Part Categories

Patio Range grill CG7200LP - Tuesday, May 12 2026

Return to Patio Range grill parts main page

More Patio Range grill models we have parts for
CG41064LP \| CG587 \| CG587NG \| CG7200 \| CG7200NG \| CG816 \| CG8400 \| CG8400NG \| PR364LP \| SK472B \| SS50072LP \| SS50072NG \| SS525LP \| SS525NG \| SS60884 \| SS60884LP \| SS60884NG \| SS62884LP \| SS62884NG \| SS888 \|

*Orders for Patio Range grill model CG7200LP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026