Omaha BQ06042-1-N Grill Parts

Highest quality replacement parts for your Omaha BQ06042-1-N - Free USA shipping $49 or more* - No Sales Tax*

Omaha BQ06042-1-N owners manual and diagrams

Diagrams & owners manual not available for grill model# BQ06042-1-N. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Omaha model: BQ06042-1-N

This page shows all of the parts we know fit model Omaha BQ06042-1-N. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Omaha grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Omaha BQ06042-1-N BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Omaha model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

BQ06042-1-N Burners

CLA-BL0229

Click for photos

304 Stainless steel infrared rear rotisserie burner with ceramic wafer for Omaha model BQ06042-1-N. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 that can be drilled for LP gas or natural gas.

Dimensions:

Maximum overall length, including mounting tab on one end: 17”
Maximum width: 3 3/8”
Burner box 15 3/8” x 3 3/8”
Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

SCTB2

Click for photos

Stainless steel burner for Omaha model BQ06042-1-N.

Part Number: SCTB2
Dimensions: 15 1/2” x 4 3/4”
Material: stainless steel
Weight: 1.0

==> All Omaha Burners.

BQ06042-1-N Burner Brackets and Carryovers

CLA-MS0109

Click for photos

Stainless steel burner support bracket. Made in USA

Part Number: CLA-MS0109
Dimensions: 31 3/4
Material: stainless steel
Weight: 3.0

==> All Omaha Burner Brackets and Carryovers.

BQ06042-1-N Cooking Grids

5S463

Click for photos

Stainless steel cooking grids (set of 3) for Omaha model BQ06042-1-N.

Part Number: 5S463
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 30 3/4”
Material: stainless steel tubes
Weight: 9.0

CG-72P-CI-X3

Click for photos

Cast iron cooking grids for Omaha model BQ06042-1-N. SET OF THREE (3) panels.

Porcelain treated, matte finish
Each panel measures 18 3/4” x 9 1/2”
Overall dimensions: 18 3/4 x 28 1/2”

Part Number: CG-72P-CI-X3
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 28 1/2”
Material: cast iron
Weight: 19.35

CG-70P-CI

Click for photos

Cast iron cooking grid for Omaha model BQ06042-1-N. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-70P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2

CG-72P-CI

Click for photos

Cast iron cooking grid for Omaha model BQ06042-1-N. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

==> All Omaha Cooking Grids.

BQ06042-1-N Heat Plates

CLA-TS0151-X3

Click for photos

SET OF THREE/3 PACK Stainless steel heat diffuser for Omaha model BQ06042-1-N. On some grill models it is also known as a Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

==> All Omaha Heat Plates.

BQ06042-1-N Smoker Trays

CLA-MS0166KIT

Click for photos

Smoker drawer kit assembly. This aftermarket part replaces the drawer and includes the following:

Drawer with handle
Drawer cover
Mounting hardware and instructions
Made in USA

WARNING: Before you order this part, please verify it can be used in your gas grill; refer to the dimensions and measure the space allowed in your grill. This smoker drawer kit does not fit into all grills. We know it fits four brand names/six model numbers. Please refer to our Return Policy.

Part Number: CLA-MS0166KIT
Dimensions: 18 1/4” x 3 3/4”
Material: stainless steel
Weight: 2.1

==> All Omaha Smoker Trays.

BQ06042-1-N Grease Trays

CLA-DS0184

Click for photos

Stainless steel grease tray. The front-to-back dimension of 17 1/4” does not include the handle. With the handle included, the overall dimension is 18”. Made in USA

Part Number: CLA-DS0184
Dimensions: 17 1/4” x 26 5/8”
Material: stainless steel
Weight: 5.2

==> All Omaha Grease Trays.

BQ06042-1-N Valves, Orifices, and Manifolds

CLA-VB0245

Click for photos

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

==> All Omaha Valves, Orifices, and Manifolds.

BQ06042-1-N Accessories

00230

Click for photos

Apple wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00230
Weight: 2.0

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

00185

Click for photos

Part Number: 00185
Material: stainless
Weight: .3

00150

Click for photos

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

Works with both charcoal and gas grills.
Easy to use and refill.
Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

CLWR

Click for photos

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

24795

Click for photos

Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.

Part Number: 24795
Weight: .3

==> All BQ06042-1-N Accessories.

BBQ Part Categories

Omaha model BQ06042-1-N - Tuesday, May 12 2026

Return to Omaha grill parts main page

More Omaha grill models we have parts for

B06W1B-28 | B06W1B-6 | B070E4-DB | B070E4-R | B09LB1-32 | B09LB1-32-4 | B09PG2-4BL | B09PG2-4CP | B09PG2-4R | B09SMG1-3F | B10PG20-2C | B10PG20-2R | B10PG23-2A | B11A20 | BQ04022 | BQ04023 | BQ04023-1 | BQ04023-2 | BQ04024 | BQ04025 | BQ04028 | BQ05037-2 | BQ05041-28 | BQ05046-6 | BQ05046-6-A | BQ05046-6N | BQ05046-6N-A | BQ05051-3 | BQ05085-1 | BQ06042-1 | BQ06043-1 | BQ06043-1-N | BQ06W03-1 | BQ06W03-1-N | BQ06W06-A | BQ06W1B | BQ06W1B-L | BQ06W1C-A | BQ06WIC | BQ51009 | BQ51010 | BQ51013 | BQ52007 |

*Orders for Omaha grill model BQ06042-1-N $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026