Nexgrill 730-0891D Grill Parts

Nexgrill logo

 

 

Highest quality replacement parts for your Nexgrill 730-0891D - Free USA shipping $49 or more* - No Sales Tax*

 

Nexgrill 730-0891D owners manual and diagrams
Diagrams & owners manual not available for grill model# 730-0891D. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement gas grill parts for Nexgrill model: 730-0891D
This page shows all of the parts we know fit model Nexgrill 730-0891D. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Nexgrill grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Nexgrill 730-0891D BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Nexgrill model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


730-0891D Burners

Stainless steel burner for Nexgrill model 730-0891D.

Part Number: 16411
Dimensions: 13 3/4” x 4 1/4”
Material: stainless steel
Weight: 0.7

$33.45
 
Qty
 

 





730-0891D Cooking Grids

Stainless steel cooking grid for Nexgrill model 730-0891D. Sold as a set of two (2).

Part Number: 5S752
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 21 1/2”
Material: stainless steel clad wire
Weight: 7.3

$96.78
 
Qty
 

 





730-0891D Heat Plates

Stainless steel Flame Tamer for Nexgrill model 730-0891D. Sold individually.

Part Number: 90831
Dimension Front-to-Back: 13 3/16”
Dimension Side-to-Side: 5 15/16”
Material: stainless steel
Weight: 1.2

$24.22
 
Qty
 

 





730-0891D Igniter Components

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
  • Push-button ignition module switch with two male spade connectors on back
  • Two 20” wires with female spade connectors
  • One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

$19.80
 
Qty
 

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
  • 1.5 volt
  • Has two (2) spark outlets (male spade connector)
  • Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
  • Uses a single AA battery (not included)
  • Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03322
Dimensions: 2 5/8” x 2”
Weight: 0.5

$35.57
 
Qty
 

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

$6.26
 
Qty
 

Ignition electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04460
Dimensions: 4 5/16” x 1 1/2”
Weight: 0.2

$10.87
 
Qty
 

 





730-0891D Heat indicators and Meat Thermometers

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.
  • Requires minimum 3/8” mounting hole
  • Single 1 3/8” probe
  • Threaded portion of probe stops at 1/2” from base
  • See photo for details


Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

$15.16
 
Qty
 

 





730-0891D Accessories

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

$16.60
 
Qty
 

Replacement brass bristle brush head for WB-8 brush. Screws included.

Part Number: WB-8RH
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.2

$9.45
 
Qty
 

 



BBQ Part Categories





















 
 

Nexgrill model 730-0891D - Sunday, May 5 2024

Return to Nexgrill grills main page



More Nexgrill grill models we have parts for
720-0825 | 720-0826 | 720-0826E | 720-0830A | 720-0830D | 720-0830F | 720-0830H | 720-0830MB | 720-0864 | 720-0864M | 720-0882A | 720-0882D | 720-0882S | 720-0888 | 720-0888A | 720-0888N | 720-0891B | 720-0891C | 720-0891CA | 720-0891D | 720-0891DA | 720-0891G | 720-0891H | 720-0891HA | 720-0891R | 720-0893 | 720-0893D | 720-0894 | 720-0894F | 720-0896 | 720-0896B | 720-0896C | 720-0896CA | 720-0896E | 720-0898 | 720-0925 | 720-0953 | 720-0953A | 720-0953B | 720-0953C | 720-0953D | 720-0953E | 720-0953F | 720-0953M | 720-0954 | 720-0954A | 720-0954G | 720-0958A | 720-0968 | 720-0969 | Complete list of Nexgrill grill models...



*Orders for Nexgrill grill model 730-0891D $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024