Kenmore 415.15603 Grill Parts

Highest quality replacement parts for your Kenmore 415.15603 - Free USA shipping $49 or more* - No Sales Tax*

Kenmore 415.15603 owners manual and diagrams

Diagrams & owners manual not available for grill model# 415.15603. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Kenmore model: 415.15603

This page shows all of the parts we know fit model Kenmore 415.15603. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Kenmore grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Kenmore 415.15603 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Kenmore model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

415.15603 Venturis

00400

Click for photos

two venturi gaskets with screws

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

SG-B

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Kenmore Venturis.

415.15603 Cooking Grids

CG-46SS

Click for photos

Cooking grid solid premium grade 304 stainless steel with for Kenmore model 415.15603.225 diameter rods.

Part Number: CG-46SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 26 5/8”
Material: stainless steel
Weight: 8.15

55801

Click for photos

Porcelain steel cooking grid for Kenmore model 415.15603. Porcelain enameled, glossy finish. Sold individually.

Part Number: 55801
Dimension Front-to-Back: 14 23/32”
Dimension Side-to-Side: 26 5/8”
Material: porcelain steel wire
Weight: 6.2

==> All Kenmore Cooking Grids.

415.15603 Rock/Briquette Grates

BG-39

Click for photos

Rock grate for holding lava rock or ceramic briquettes.

Part Number: BG-39
Dimension Front-to-Back: 11”
Dimension Side-to-Side: 25”
Material: carbon steel
Weight: 4.0

==> All Kenmore Rock/Briquette Grates.

415.15603 Heat Plates

VRB-8

Click for photos

Stainless steel Vap-O-Riser protective burner shields for 8000 series grills for Kenmore model 415.15603.

Part Number: VRB-8
Dimension Front-to-Back: 26 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.2

==> All Kenmore Heat Plates.

415.15603 Igniter Components

IG-11B

Click for photos

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.

Gas collector box
Ceramic electrode and wire
Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-11B
Weight: 0.3

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-18B

Click for photos

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-28B

Click for photos

Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-28B
Weight: 0.2

==> All Kenmore Igniter Components.

415.15603 Warming Racks

AP-6A

Click for photos

Universal warming rack. For use on grills with at least 22” inside dimension.

Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3

==> All Kenmore Warming Racks.

415.15603 Rotisserie components

RO-6

Click for photos

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

==> All Kenmore Rotisserie components.

415.15603 Accessories

BQ-3A

Click for photos

BBQ'er choice porcelain grill briquets. The finest available.

Self-Cleaning Porcelain Briquettes.
Made of fired porcelain for even heat transfer.
Virtually indestructible.
About 56 pieces covers approximately 310 square inches.
Made in USA.

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

45887

Click for photos

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

00220

Click for photos

GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

40259

Click for photos

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

41338

Click for photos

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

14950

Click for photos

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

90963

Click for photos

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.2

==> All 415.15603 Accessories.

BBQ Part Categories

Kenmore model 415.15603 - Tuesday, May 12 2026

Return to Kenmore grills main page

More Kenmore grill models we have parts for

2383080 | 2383081 | 2383580 | 2384580 | 2387690 | 2387691 | 239358 | 2397630 | 2397631 | 2397650 | 2397651 | 2397670 | 2397671 | 2397970 | 252358090 | 258.1015180 | 258.1024180 | 258.1026180 | 258.1026181 | 258.1028180 | 258.1029190 | 258.1036180 | 258.1036181 | 258.1037121 | 258.1037180 | 258.1046180 | 258.1046181 | 258.1046280 | 258.1048180 | 258.1049190 | 258.1049490 | 258.1049590 | 258.1050420 | 258.1054180 | 258.1055180 | 258.1055520 | 258.10557 | 258.1056080 | 258.1056081 | 258.1056180 | 258.1056181 | 258.1056280 | 258.1058080 | 258.1058180 | 258.1058480 | 258.1059190 | 258.1060420 | 258.1064180 | 258.1064280 | 258.1065080 | Complete list of Kenmore grill models...

*Orders for Kenmore grill model 415.15603 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026