Kenmore 141.16678801 Grill Parts

Highest quality replacement parts for your Kenmore 141.16678801 - Free USA shipping $49 or more* - No Sales Tax*

Kenmore 141.16678801 owners manual and diagrams

Diagrams & owners manual not available for grill model# 141.16678801. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Kenmore model: 141.16678801

All of the parts we have for Kenmore 141.16678801 are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Kenmore grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Kenmore 141.16678801 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Kenmore model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

141.16678801 Burners

P020080324 / SCTB5

Click for photos

Sam's Club burner W/ Lip like OEM for Kenmore model 141.16678801.

Part Number: SCTB5 (Replaces Kenmore P020080324)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All Kenmore Burners.

141.16678801 Cooking Grids

P01604013B / 506S3

Click for photos

Stainless steel cooking grid set for Kenmore model 141.16678801.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3 (Replaces Kenmore P01604013B)
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All Kenmore Cooking Grids.

141.16678801 Heat Plates

P017080364 / CLA-TS0314

Click for photos

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Kenmore model 141.16678801. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314 (Replaces Kenmore P017080364)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

P017080364 / SCHP4

Click for photos

Stainless steel heat plate; also referred to as a flame tamer and savor plate for Kenmore model 141.16678801.

Part Number: SCHP4 (Replaces Kenmore P017080364)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

==> All Kenmore Heat Plates.

141.16678801 Igniter Components

P02609009M / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Kenmore P02609009M)
Weight: 0.11

P02502274C / IGEIB4-B

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B (Replaces Kenmore P02502274C)
Weight: 0.3

TS-IG4010

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Kenmore Igniter Components.

141.16678801 Knobs and Handles

P03428073H / 02342

Click for photos

Universal 2 5/16” knob.

Selectable D-Value
Selectable socket diameter - 6mm or 8mm.
Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
Includes 6 shaft inserts and set screw.
Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342 (Replaces Kenmore P03428073H)
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

==> All Kenmore Knobs and Handles.

141.16678801 Accessories

00270

Click for photos

Maple wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00270
Weight: 1.3

40259

Click for photos

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

24785

Click for photos

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

98130

Click for photos

Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Material: porcelain steel
Weight: 1.0

CGT

Click for photos

Cannon Grill Towel.

Part Number: CGT
Dimensions: 16” x 25”
Weight: 0.30

==> All 141.16678801 Accessories.

BBQ Part Categories

Kenmore grill 141.16678801 - Tuesday, Oct 7 2025

Return to Kenmore grill parts main page

More Kenmore grill models we have parts for

141.17690 | 141.176901 | 141.17691 | 141.17692 | 141.17860 | 146.10016510 | 146.16132110 | 146.16133110 | 146.16142210 | 146.16153110 | 146.16197210 | 146.16197211 | 146.16198210 | 146.16198211 | 146.16222010 | 146.23673310 | 146.23674310 | 146.23675310 | 146.23678310 | 146.23679310 | 146.23680310 | 146.33585410 | 146.33586410 | 146.33587410 | 146.33588410 | 146.33589410 | 146.34461410 | 146.34611410 | 146.46365610 | 146.46366610 | 146.46372610 | 146.47223610 | 146.48589710 | 146.48593710 | 148.16136110 | 148.16137110 | 148.16154210 | 148.16154211 | 148.16156210 | 148.16156211 | 148.16157210 | 148.1637110 | 148.16656010 | 148.16656011 | 148.20125510 | 148.20126510 | 148.23682310 | 148.23683310 | 148.34176410 | 148.34176411 | Complete list of Kenmore grill models...

*Orders for Kenmore grill model 141.16678801 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: Oct 7 2025