Grill Mate B2618-SB Grill Parts

Highest quality replacement parts for your Grill Mate B2618-SB - Free USA shipping $49 or more* - No Sales Tax*

Grill Mate B2618-SB owners manual and diagrams

Diagrams & owners manual not available for grill model# B2618-SB. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Grill Mate model: B2618-SB

This page shows all of the parts we know fit model Grill Mate B2618-SB. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Grill Mate grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Grill Mate B2618-SB BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grill Mate model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

B2618-SB Cooking Grids

58201

Click for photos

Porcelain steel cooking grid for Grill Mate model B2618-SB. Porcelain enameled, glossy finish. Sold individually.

Part Number: 58201
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 25”
Material: porcelain steel bar
Weight: 4.0

==> All Grill Mate Cooking Grids.

B2618-SB Heat Plates

92681

Click for photos

Porcelain steel heat plate for Grill Mate model B2618-SB. Sold individually.

Part Number: 92681
Dimension Front-to-Back: 22 1/4”
Dimension Side-to-Side: 8 5/8”
Material: porcelain steel
Weight: 2.5

==> All Grill Mate Heat Plates.

B2618-SB Igniter Components

IGEIB2-B

Click for photos

Battery powered push button igniter.

Has two (2) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B
Weight: 0.3

IG-18B

Click for photos

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-4B

Click for photos

Ignitor collector box and electrode for thru casting mounts. Preassembled. Includes:

Collector box and ceramic electrode with male spade connector
Locking nuts and washer
Ground lug (not shown)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-4B
Weight: 0.3

03800

Click for photos

Collector box and ceramic electrode with male spade connector. Mounts perpendicular through casting with threaded rod and locking nuts. Includes igniter ground lug, but no ground wire, see ground wire 03620.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03800
Material: ceramic
Weight: 0.2

IG-5B

Click for photos

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

IG-15B

Click for photos

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

TS-IG2006

Click for photos

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

03750

Click for photos

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03751

Click for photos

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

==> All Grill Mate Igniter Components.

B2618-SB Heat indicators and Meat Thermometers

072-6800-0

Click for photos

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

==> All Grill Mate Heat indicators and Meat Thermometers.

B2618-SB Accessories

BP-5

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

FS-1

Click for photos

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

WB-3

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

==> All B2618-SB Accessories.

BBQ Part Categories

Grill Mate grill model B2618-SB - Sunday, May 5 2024

Return to Grill Mate grill parts main page

More Grill Mate grill models we have parts for
B-5008 \| B-8800 \| B5016-SB \| CT-3200 \| GC-822 \| LGM1532 \| LGM1537 \| PR1900 \| PR4000 \| PR4400 \| PR5000 \| PR5011 \| PR7000 \| PR7100 \| PR7100NG \| PR8100 \| PR9250 \| SR001-SB \|

*Orders for Grill Mate grill model B2618-SB $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024