Ducane Affinity 4200 31421001 Grill Parts

Stainless steel burners for Ducane Affinity models for Ducane model 31421001. SET OF FOUR (4). Includes spider guard.

Part Number: DUCT1-X4
Dimensions: 18” x 1”
Material: stainless steel
Weight: 2.4

Stainless steel burner for Ducane Affinity models for Ducane model 31421001. Includes spider guard.

Part Number: DUCT1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.6

Stamped porcelain steel cooking grids for Ducane model 31421001. Porcelain enameled, glossy finish. Sold as a set of three (3).

Part Number: 53083
Dimension Front-to-Back: 17 13/16”
Dimension Side-to-Side: 29 1/4”
Material: stamped porcelain steel
Weight: 8.10

Cast iron cooking grids (set of 2) for Ducane model 31421001. Porcelain enameled, glossy finish.

Part Number: 68502
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 28 3/4”
Material: gloss cast iron
Weight: 14.12

Stainless steel cooking grid for Ducane Affinity grills for Ducane model 31421001.

• 304 commercial grade stainless steel
• 1/4” solid stainless rods
• Dimensions: 18” x 14 7/8”
• Made in USA.
• Sold individually.

Unlike the OEM Ducane grids these replace, these high quality made-in-the-USA grids are made of high quality 304 stainless steel that resists rust and corrosion far more than the originals.

Part Number: CLA-GS0064 (Replaces Ducane 30501009)
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 14 7/8”
Material: stainless steel
Weight: 5.4

Stainless steel heat distribution plates for Ducane model 31421001. SET OF FOUR (4). Fits Ducane Affinity 4100 and 4200 series 4-burner grills. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0044-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 3.2

Stainless steel heat distribution plate for Ducane Affinity grills for Ducane model 31421001. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.


Part Number: CLA-TS0044
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 0.8

Porcelain steel Heat Distribution Plate for Ducane model 31421001. Sold individually.

Part Number: 99351
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 6”
Material: porcelain steel
Weight: 1.6

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

• Requires minimum 3/8” mounting hole
• Single 1 3/8” probe
• Threaded portion of probe stops at 1/2” from base
• See photo for details

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

Part Number: 00185
Material: stainless
Weight: .3

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

• Works with both charcoal and gas grills.
• Easy to use and refill.
• Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3