Ducane Affinity 4200 30741201 Grill Parts

Stainless steel burners for Ducane Affinity models for Ducane model 30741201. SET OF FOUR (4). Includes spider guard.

Part Number: DUCT1-X4
Dimensions: 18” x 1”
Material: stainless steel
Weight: 2.4

Stainless steel burner for Ducane Affinity models for Ducane model 30741201. Includes spider guard.

Part Number: DUCT1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.6

Stamped porcelain steel cooking grids for Ducane model 30741201. Porcelain enameled, glossy finish. Sold as a set of three (3).

Part Number: 53083
Dimension Front-to-Back: 17 13/16”
Dimension Side-to-Side: 29 1/4”
Material: stamped porcelain steel
Weight: 8.10

Cast iron cooking grids (set of 2) for Ducane model 30741201. Porcelain enameled, glossy finish.

Part Number: 68502
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 28 3/4”
Material: gloss cast iron
Weight: 14.12

Stainless steel cooking grid for Ducane Affinity grills for Ducane model 30741201.

• 304 commercial grade stainless steel
• 1/4” solid stainless rods
• Dimensions: 18” x 14 7/8”
• Made in USA.
• Sold individually.

Unlike the OEM Ducane grids these replace, these high quality made-in-the-USA grids are made of high quality 304 stainless steel that resists rust and corrosion far more than the originals.

Part Number: CLA-GS0064 (Replaces Ducane 30501009)
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 14 7/8”
Material: stainless steel
Weight: 5.4

Stainless steel heat distribution plates for Ducane model 30741201. SET OF FOUR (4). Fits Ducane Affinity 4100 and 4200 series 4-burner grills. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0044-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 3.2

Stainless steel heat distribution plate for Ducane Affinity grills for Ducane model 30741201. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.


Part Number: CLA-TS0044
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 0.8

Porcelain steel Heat Distribution Plate for Ducane model 30741201. Sold individually.

Part Number: 99351
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 6”
Material: porcelain steel
Weight: 1.6

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

• Requires minimum 3/8” mounting hole
• Single 1 3/8” probe
• Threaded portion of probe stops at 1/2” from base
• See photo for details

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long.

Part Number: SR-7B
Dimensions: 19 1/2
Material: chrome steel
Weight: 1.0

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30