Grill-Parts home

Costco SGR30MLP Grill Parts

Costco logo

 

 

Highest quality replacement parts for your Costco SGR30MLP - Free USA shipping $49 or more* - No Sales Tax*

 

Costco SGR30MLP owners manual and diagrams
Diagrams & owners manual not available for grill model# SGR30MLP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts to fit Costco model: SGR30MLP
This page shows all of the parts we know fit model Costco SGR30MLP. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Costco grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Costco SGR30MLP BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Costco model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


SGR30MLP Burners

CLA-BL0229
Click for photos
304 Stainless steel infrared rear rotisserie burner with ceramic wafer for Costco model SGR30MLP. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 that can be drilled for LP gas or natural gas.

Dimensions:
  • Maximum overall length, including mounting tab on one end: 17”
  • Maximum width: 3 3/8”
  • Burner box 15 3/8” x 3 3/8”
  • Mounting holes: 16 1/8” on center


Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

$118.70
 

TUST3
Click for photos
Stainless steel triple burner set for Costco model SGR30MLP. Electrodes not incuded.

Part Number: TUST3
Dimensions: 18” x 15 3/4”
Material: stainless steel
Weight: 3.5

$76.96
 

==> All Costco Burners.
 





SGR30MLP Cooking Grids

53S33
Click for photos
Stainless steel cooking grids with solid 1/4” rods (set of 3) for Costco model SGR30MLP.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

$194.98
 

==> All Costco Cooking Grids.
 





SGR30MLP Heat Plates

CLA-MS0091
Click for photos
Stainless steel electrode shield for Costco model SGR30MLP. Made in USA

Part Number: CLA-MS0091
Dimension Front-to-Back: 14 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.4

$20.27
 

CLA-TS0072
Click for photos
Large Flavor Grid for Costco model SGR30MLP. Stainless steel. Only one of these are used on the grill. This part has an extended side that faces the infrared burner and acts as a heat shield. The other Flavor Grids do not have this shield.
  • One required per grill.
  • Sold individually.
  • Made in USA.


NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA

Part Number: CLA-TS0072
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 1.2

$39.72
 

SONHP1
Click for photos
Stainless steel Flavor Grid for Costco model SGR30MLP.

Part Number: SONHP1
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.6

$34.91
 

==> All Costco Heat Plates.
 





SGR30MLP Igniter Components

10342-T12
Click for photos
21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

$4.21
 

IG-25B
Click for photos
Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.
  • Sold individually, two (2) required
  • Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-25B
Weight: 0.3

$13.40
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

==> All Costco Igniter Components.
 





SGR30MLP Valves, Orifices, and Manifolds

CLA-VB0245
Click for photos
Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.


NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

$24.42
 

==> All Costco Valves, Orifices, and Manifolds.
 





SGR30MLP Accessories

SSST
Click for photos
Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.


Part Number: SSST
Material: stainless steel
Weight: 1.5

$24.00
 
SALE  $27.30

US10
Click for photos

5-piece unique tennis oriented utensil set. Constructed of heavy stainless steel with ”tennis grips” on each utensil. Includes yellow tennis ball style salt & pepper shakers, along with spatula, fork and tong.

Makes a nice gift.for tennis-minded folks



Part Number: US10
Weight: 5.00

$36.78
 

00185
Click for photos


Part Number: 00185
Material: stainless
Weight: .3

$17.30
 

42055
Click for photos

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76
 

RR-2
Click for photos
Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.


Part Number: RR-2
Material: chrome steel
Weight: 1.0

$13.30
 
SALE  $14.99

VTC-B
Click for photos
Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

$5.07
 

==> All SGR30MLP Accessories.
 



BBQ Part Categories





















 
 

Costco SGR30MLP -Tuesday, May 12 2026

Return to Costco grills main page



More Costco grill models we have parts for
GSC3218WA | GSC3218WAN | GSS2116B-1 | PC-2600L | PC-2600L (pre 2006) | PCA-2600L | PCA-2600L (pre 2006) | SGIR27LP | SGR27LP | SGR30 | SGR30M | Steadfast Two | TGR30LP | TGR38 | 1500111 | 1500131 | 2001SS-LP | 210001-LP | 21009 | 21011 | 21118 | 21118CE | 21119 | 21119CE | 21128 | 21128CE | 21129 | 21129CE | 44328 | 44329 | 463230703 | 463241205 | 463242304 | 463269806 | 464246004 | 466242404 | 466242504 | 527036 | 720-0008-LP | 720-0011 | 720-0021-LP | 720-0033 | 720-0037 | 720-0038 Classic Pedestal | 720-0038-04U Classic Pedestal | 720-0039-LP | 720-0070-LP | 720-0077-LP | Complete list of Costco grill models...



*Orders for Costco grill model SGR30MLP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026