Costco CGR30NG Grill Parts

Highest quality replacement parts for your Costco CGR30NG - Free USA shipping $49 or more* - No Sales Tax*

Costco CGR30NG owners manual and diagrams

Diagrams & owners manual not available for grill model# CGR30NG. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Costco model: CGR30NG

This page shows all of the parts we know fit model Costco CGR30NG. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Costco grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Costco CGR30NG BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Costco model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CGR30NG Burners

Click for photos

Stainless steel triple burner set for Costco model CGR30NG.

Part Number: SONT3
Dimensions: 17 13/16” x 18 1/2”
Material: stainless steel
Weight: 1.6

==> All Costco Burners.

CGR30NG Burner Brackets and Carryovers

Click for photos

Stainless steel Z-Bar burner support bracket. Made in USA

Part Number: CLA-MS0116
Dimensions: 2” x 23”
Material: stainless steel
Weight: 0.70

==> All Costco Burner Brackets and Carryovers.

CGR30NG Cooking Grids

Click for photos

Stainless steel cooking grids with solid 1/4” rods (set of 3) for Costco model CGR30NG.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

==> All Costco Cooking Grids.

CGR30NG Heat Plates

Click for photos

Stainless steel Flavor Grid for Costco model CGR30NG.

Part Number: SONHP1
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.6

Click for photos

Bottom Flavor Grid for Costco model CGR30NG. Stainless steel. Made in USA.

Part Number: CLA-MS0181
Dimension Front-to-Back: 12”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.70

Click for photos

Upper flavor grid for Costco model CGR30NG. Stainless steel. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Has unique underside, see photos.

Part Number: CLA-TS0182
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.2

==> All Costco Heat Plates.

CGR30NG Igniter Components

Click for photos

Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.

Sold individually, two (2) required
Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-25B
Weight: 0.3

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Click for photos

21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

==> All Costco Igniter Components.

CGR30NG Miscellaneous Repair Parts

Click for photos

Electrode heat shield. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimensions: 16 13/16
Material: stainless steel
Weight: 0.4

==> All Costco Miscellaneous Repair Parts.

CGR30NG Accessories

Click for photos

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

==> All CGR30NG Accessories.

BBQ Part Categories

Costco grill CGR30NG - Sunday, May 5 2024

Return to Costco grills main page

More Costco grill models we have parts for
464246004 \| 466242404 \| 466242504 \| 527036 \| 720-0008-LP \| 720-0011 \| 720-0021-LP \| 720-0033 \| 720-0037 \| 720-0038 Classic Pedestal \| 720-0038-04U Classic Pedestal \| 720-0039-LP \| 720-0070-LP \| 720-0077-LP \| 720-0083-04R \| 720-0108 \| 720-0193 \| 720-0432 \| 720-0709B \| 720-0720 \| 720-0727 \| 720-0733 \| 720-0830MB \| 720-0896CA \| 720-0954G \| 730-0954G \| 740-0711 \| 740-0712 \| 780-0832C \| 860-0193 \| Bread Breaker Two \| CGR27 \| CGR27LP \| CGR30 \| CGR30LP \| CGR44 \| CGR54 \| CS784LP \| CS812 \| CS812LP \| CS892LP \| GSC3218WA \| GSC3218WAN \| GSS2116B-1 \| PC-2600L \| PC-2600L (pre 2006) \| PCA-2600L \| PCA-2600L (pre 2006) \| Complete list of Costco grill models...

More Costco grill models we have parts for

464246004 | 466242404 | 466242504 | 527036 | 720-0008-LP | 720-0011 | 720-0021-LP | 720-0033 | 720-0037 | 720-0038 Classic Pedestal | 720-0038-04U Classic Pedestal | 720-0039-LP | 720-0070-LP | 720-0077-LP | 720-0083-04R | 720-0108 | 720-0193 | 720-0432 | 720-0709B | 720-0720 | 720-0727 | 720-0733 | 720-0830MB | 720-0896CA | 720-0954G | 730-0954G | 740-0711 | 740-0712 | 780-0832C | 860-0193 | Bread Breaker Two | CGR27 | CGR27LP | CGR30 | CGR30LP | CGR44 | CGR54 | CS784LP | CS812 | CS812LP | CS892LP | GSC3218WA | GSC3218WAN | GSS2116B-1 | PC-2600L | PC-2600L (pre 2006) | PCA-2600L | PCA-2600L (pre 2006) | Complete list of Costco grill models...