Capt'n Cook CK4CKWN Grill Parts

Highest quality replacement parts for your Capt'n Cook CK4CKWN - Free USA shipping $49 or more* - No Sales Tax*

Capt'n Cook CK4CKWN owners manual and diagrams

Diagrams & owners manual not available for grill model# CK4CKWN. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Capt'n Cook model: CK4CKWN

This page shows all of the parts we know fit model Capt'n Cook CK4CKWN. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Capt'n Cook grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Capt'n Cook CK4CKWN BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Capt'n Cook model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CK4CKWN Burners

Click for photos

Cast iron burner for Capt'n Cook model CK4CKWN.

Part Number: CIT
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 4.2

Click for photos

Cast stainless steel burner for Capt'n Cook model CK4CKWN. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.

NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.

Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2

==> All Capt'n Cook Burners.

CK4CKWN Cooking Grids

Click for photos

Cast iron cooking grid for Capt'n Cook model CK4CKWN. Porcelain treated, matte finish. Sold individually, number required varies by grill model

Part Number: CG-60P-CI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.65

==> All Capt'n Cook Cooking Grids.

CK4CKWN Rock/Briquette Grates

Click for photos

Stainless steel Flame Tamer with 17 ceramic briquettes. This part also replaces an older 16-briquette version that was a little shorter and a bit narrower.

Part Number: TCCFT
Dimension Front-to-Back: 18 1/8”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 5.0

==> All Capt'n Cook Rock/Briquette Grates.

CK4CKWN Heat Plates

Click for photos

Stainless steel Heat Tent for Capt'n Cook model CK4CKWN.

Part Number: COHP1
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.45

==> All Capt'n Cook Heat Plates.

CK4CKWN Igniter Components

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

==> All Capt'n Cook Igniter Components.

CK4CKWN Accessories

Click for photos

Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

Stainless steel straight handle grill brush with replaceable head. Brass bristles and scarper. See part# WB-8RH for replacement grill brush heads. 18 1/2” long.
This part is currently out of stock, but more are already on the way and expected to arrive SPRING 23

Part Number: WB-8
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.8

==> All CK4CKWN Accessories.

BBQ Part Categories

Capt'n Cook grill model CK4CKWN - Thursday, Apr 4 2024

Return to Capt'n Cook grills main page

More Capt'n Cook grill models we have parts for
A5 \| B2608ALP \| B2608ANG \| B2610ALP \| B2610ANG \| B2612ALP \| B2612ANG \| B3208ALP \| B3208ANG \| B3210ALP \| B3210ANG \| CG3CKW \| CG3CKWN \| CG4CKW \| CG4CKWN \| CG5CKW \| CG5CKWN \| XG3CKWA \| XG3CKWN \| XG3CKWNA \| XG4CKWA \| XG4CKWNA \| XG5CKWA \| XG5CKWNA \|