Browning GR2061307-BN-00 Grill Parts

Highest quality replacement parts for your Browning GR2061307-BN-00 - Free USA shipping $49 or more* - No Sales Tax*

Browning GR2061307-BN-00 owners manual and diagrams

Diagrams & owners manual not available for grill model# GR2061307-BN-00. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Browning model: GR2061307-BN-00

All of the parts we have for Browning GR2061307-BN-00 are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Browning grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Browning GR2061307-BN-00 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Browning model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

GR2061307-BN-00 Burners

BMTB4

Click for photos

Stainless steel tube burner for many Nexgrill Manufactured Grills for Browning model GR2061307-BN-00.

Part Number: BMTB4
Dimensions: 15 3/8
Material: stainless steel
Weight: 0.50

==> All Browning Burners.

GR2061307-BN-00 Burner Brackets and Carryovers

09423

Click for photos

Stainless steel burner cross-over tube.

Part Number: 09423
Dimensions: 7 5/8” x 2 3/8”
Material: stainless steel
Weight: 0.2

==> All Browning Burner Brackets and Carryovers.

GR2061307-BN-00 Cooking Grids

CG-73P-CI-X3

Click for photos

Cast iron cooking grids for Browning model GR2061307-BN-00. SET OF THREE (3).

Porcelain treated, matte finish
3 panels, each 17 5/8” x 8 3/4”
Total width: 26 1/4”

Part Number: CG-73P-CI-X3
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 1/4”
Material: cast iron
Weight: 16.65

==> All Browning Cooking Grids.

GR2061307-BN-00 Heat Plates

CLA-TS0135-X4

Click for photos

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for Browning model GR2061307-BN-00. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

CHMBHP3

Click for photos

Stainless steel Heat Distribution Plate / Flame Tamer for Browning model GR2061307-BN-00.

Part Number: CHMBHP3
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: .66

==> All Browning Heat Plates.

GR2061307-BN-00 Igniter Components

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

UP-7B

Click for photos

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-7B
Weight: 0.3

UP-9B

Click for photos

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-31B

Click for photos

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

==> All Browning Igniter Components.

GR2061307-BN-00 Heat indicators and Meat Thermometers

00016

Click for photos

Round heat indicator.

Single probe
3” diameter
Requires 3/8” mounting hole

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

==> All Browning Heat indicators and Meat Thermometers.

GR2061307-BN-00 Accessories

00281

Click for photos

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

44070

Click for photos

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

41338

Click for photos

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

RR-3

Click for photos

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

WB-7

Click for photos

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All GR2061307-BN-00 Accessories.

BBQ Part Categories

Browning GR2061307-BN-00 -Tuesday, May 12 2026

Return to Browning grills main page

More Browning grill models we have parts for
BR4GRILL \| EX60B \| EX90LWB \| PG100B \| YK60B \|

*Orders for Browning grill model GR2061307-BN-00 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026