Broilmaster P4 Grill Parts

Stainless steel burner and venturi assembly kit for Broilmaster model P4. Comes with all necessary gaskets and screws.

Part Number: 10502-725LR
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.5

Stainless steel H burner for Broilmaster model P4. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.

Part Number: 10502
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.5

Cast iron bowtie burner and venturi assembly kit for Broilmaster model P4. Includes:

• Cast iron burner
• One (1) DV-7 twin venturi
• All necessary gaskets and scews.

Part Number: WDSB+DV-7
Dimensions: 9 1/2” x 17 1/4”
Material: cast iron
Weight: 10.3

Cast iron bowtie burner for Broilmaster model P4. Gasket and screws included.

Part Number: WDSB
Dimensions: 9 1/2” x 17 1/4”
Material: cast iron
Weight: 9.6

Stainless Steel Bowtie Burner for P4X (Display Pkg) for Broilmaster model P4.

Part Number: DPP112
Weight: 2.50

Stainless steel burner and venturi assembly for D4, P4, U4, U5 for Broilmaster model P4.
Also replaces part# B070435 and B100512.

Part Number: DPP102
Dimensions: 9 1/2” x 17”
Material: stainless steel
Weight: 2.6

Cast iron burner and venturi assembly kit for Broilmaster model P4. Comes with all necessary gaskets and screws.

Part Number: 20502-725LR
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 9.0

cast iron burner head for Broilmaster model P4.

Part Number: 20502
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 7.7

Stainless steel Bowtie burner and venturi assembly kit for Broilmaster model P4. Fits Broilmaster D3, P3, S3, U3 grill heads.

This burner is an exact duplicate of the original 21” OEM burner DPP101, and is made by the same manufacturer using the same materials as the original. The new official Broilmaster version of DPP101 is a 17” Bowtie burner

NOTE: The original DPP101, a SS 21” bowtie burner, is no longer available from the manufacturer. The new DPP101 from Broilmaster, which is 3” shorter and a little narrower, is a fully functional replacement.

Comes with all necessary gaskets and screws.

Part Number: DPP101-R
Dimensions: 10 1/2” x 21”
Material: stainless steel
Weight: 3.5

Gasket kit for Broilmaster model P4. Round gasket fits all dual cast iron bowtie burners.

Part Number: DHK-3
Weight: 0.1

Cast iron bowtie burner and venturi assembly kit for Broilmaster model P4. Includes:

• Cast iron burner
• One (1) DV-8 twin venturi
• All necessary gaskets and scews.

Part Number: WDSB+DV-8
Dimensions: 9 1/2” x 17 1/4”
Material: cast iron
Weight: 10.3

Dual venturi. Does not include bracket spot-welded between venturi tubes. Includes all necessary gaskets and screws/nuts.

Part Number: 725LR
Dimensions: 4 3/4” x 3 7/16”
Material: zinc plated steel
Weight: 0.7

Plated steel twin venturi.

Part Number: DV-7
Dimensions: 8 1/4
Material: plated steel
Weight: .3

Plated steel twin venturi.

Part Number: DV-8
Dimensions: 4 5/8” x 2 1/2”
Material: plated steel
Weight: .3

Cast iron ”water fall style/multiple level” cooking grids (set of 3) for Broilmaster model P4. Porcelain treated, glossy finish.

Part Number: 62203
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 21 3/4”
Material: gloss cast iron
Weight: 17.6

Premium quality stainless steel cooking grids for Broilmaster model P4. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• .225 diameter solid stainless rods

• Each panel measures 15 1/4” x 11”
• Overall dimensions: 15 1/4” x 22”

.

Part Number: CG-21SS-X2
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 22”
Material: stainless steel
Weight: 8.0

Heavy duty stainless steel cooking grids for size 4 grill head for Broilmaster model P4.

• Heavy gauge 5/16” stainless rods
• Restaurant quality stainless steel
• 2 piece set
• Fits P4, D4, U4
• Same as part B101320

Part Number: DPA112
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 11 1/4”
Material: Stainless steel
Weight: 17.00

Premium grade solid stainless steel grid with 1/4” rods for Broilmaster model P4. Sold individually, two (2) required.

Part Number: CG-21SS
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 11”
Material: stainless steel
Weight: 4.00

Rock grate for holding lava rock or ceramic briquettes.

Part Number: BG-14
Dimension Front-to-Back: 12 1/4”
Dimension Side-to-Side: 20 1/4”
Material: Nickel plated steel
Weight: 3.8

Briquette Rack. Fits all size 3 grill head models. Manufacturer's Note: Some versions of this rack may include stainless steel extension brackets. See part DPA116 for Ceramic Flare Busters.

Part Number: B101061
Dimension Front-to-Back: 13 13/16”
Dimension Side-to-Side: 23 7/8”
Material: porcelain steel
Weight: 5.4

Briquet Rack - premium grade stainless steel rods. Originally, this briquet rack was made of porcelain enameled steel rods. Fits P4/D4. See part DPA117 for Ceramic Flare Busters.

Part Number: B067449
Dimension Front-to-Back: 12 1/2”
Dimension Side-to-Side: 20 1/8”
Material: porcelain steel
Weight: 4.8

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models for Broilmaster model P4.

Genuine Broilmaster fatory part. Also known as DPP7SS.

Part Number: B063065
Weight: 1.0

Genuine OEM Broilmaster stainless steel heat and wind deflection shield for Broilmaster model P4. Also replaces part# DPP6SS, B068977 and B063065.

Part Number: DPP7SS
Dimension Front-to-Back: 8”
Dimension Side-to-Side: 16 11/16”
Material: Stainless steel
Weight: 1.10

Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces for Broilmaster model P4. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen.

Part Number: DPA117
Material: ceramic
Weight: 4.6

Flare Busters Flat Ceramic Pads for Broilmaster model P4. For P3, T3, D3, H3. Package of 12. Each tile measures 7 1/4 ” x 3 1/2”. Used with B101061 rack.

Part Number: DPA116
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Material: ceramic
Weight: 4.5

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4

• Uses 1 AA battery (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072218
Weight: 0.2

Collector Box (Electronic Ignitor), electrode, & connector wire with female spade end. Fits P3/P4

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B100446
Weight: 0.2

Collector box kit for P3/P4 and D3/D4 with electronic igniters.

Includes:
• B100446 Collector box, electrode, & connector wire with flat spade end
• B069747 Grounding lug
• B072684 Igniter ground wire
• B069743 Aluminum spacer

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B100402
Weight: 0.2

Electronic igniter kit.

Includes:
• B072218 Electronic igniter
• B100446 Collector box, electrode, & wire
• B069747 Grounding lug
• B072684 igniter ground wire
• B069743 Aluminum spacer

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DPP20
Weight: 0.4

Collector Box Spacer, Fits P 3/4 D 3/4/5

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069743
Weight: 0.01

Ground Lug, Fits All Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069747
Weight: 0.01

Ground Wire, Fits All Electronic Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072684
Weight: 0.1

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.

• Off position D-Value: 3 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: B070084
Weight: 0.04

Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.

Part Number: TG-2B
Weight: 0.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65

BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA.

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3