Broilmaster H4XN Grill Parts

Highest quality replacement parts for your Broilmaster H4XN - Free USA shipping $49 or more* - No Sales Tax*

Broilmaster H4XN owners manual and diagrams

Diagrams & owners manual not available for grill model# H4XN. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for Broilmaster model: H4XN

This page shows all of the parts we know fit model Broilmaster H4XN. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Broilmaster grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Broilmaster H4XN BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Broilmaster model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

H4XN Burners

B101618

Click for photos

B101618 Burner and venturi assembly for Broilmaster model H4XN. Fits H4X series grills. Includes all necessary gaskets and screws.

Genuine Broilmaster factory part. Also knwn as part# DPP115.

Note: H4X Models 2012 require collector Box Kit DPP116.

Part Number: B101618
Weight: 1.0

==> All Broilmaster Burners.

H4XN Cooking Grids

B101492

Click for photos

B101492 Stainless steel single level cooking grids for H4 series grills for Broilmaster model H4XN. SET OF TWO (2) grids.

Genuine Broilmaster factory part. Also known as DPA114.

Part Number: B101492
Weight: 1.8

==> All Broilmaster Cooking Grids.

H4XN Rock/Briquette Grates

B067449

Click for photos

Briquet Rack - This briquette rack is porcelain enameled steel rods; however, there have been times when the manufacturer made these in stainless steel without a price difference. Fits P4/D4. See partDPA117 for Ceramic Flare Busters.

Part Number: B067449
Dimension Front-to-Back: 12 1/2”
Dimension Side-to-Side: 20 1/8”
Material: porcelain steel
Weight: 4.8

==> All Broilmaster Rock/Briquette Grates.

H4XN Heat Plates

DPA117

Click for photos

Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces for Broilmaster model H4XN. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen.

Part Number: DPA117
Material: ceramic
Weight: 4.6

==> All Broilmaster Heat Plates.

H4XN Igniter Components

B072218

Click for photos

Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4

Uses 1 AA battery (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072218
Weight: 0.2

B072684

Click for photos

Ground wire with female spade ends for battery-operated ignitors; 12” long. Fits All Electronic Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072684
Weight: 0.05

B069747

Click for photos

Ground Lug, Fits All Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069747
Weight: 0.01

B069743

Click for photos

Collector Box Spacer, Fits P 3/4 D 3/4/5

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069743
Weight: 0.01

B100446

Click for photos

Collector Box (Electronic Ignitor), electrode, and connector wire with female spade end. Please refer to DPP116 Kit if ground wire needed and two screws; does include sleeve # B069743. Fits P3/P4

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B100446
Weight: 0.10

DPP116

Click for photos

Collector Box Kit - (Mounts to Burner). Includes collector box/electrode/connector wire, ground wire and screws. Does not include sleeve # B069743. Fits: P3X, P4X, H3X, H4X all Q3X 2012 with H burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DPP116
Weight: .20

==> All Broilmaster Igniter Components.

H4XN Knobs and Handles

B070084

Click for photos

Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.

Off position D-Value: 3 o'clock
Knob diameter: 1 5/8”
Socket diameter: 5/16”
Knob shaft: 1/2”

Part Number: B070084
Weight: 0.04

==> All Broilmaster Knobs and Handles.

H4XN Heat indicators and Meat Thermometers

TG-2B

Click for photos

Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.

Part Number: TG-2B
Weight: 0.2

TG-1B

Click for photos

Universal clip-on temperature gauge fits most grills. Find out if your grill is still hot at a glance.

Part Number: TG-1B
Weight: 0.3

==> All Broilmaster Heat indicators and Meat Thermometers.

H4XN Accessories

45887

Click for photos

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

BP-7

Click for photos

Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

SF-1

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

00185

Click for photos

Part Number: 00185
Material: stainless
Weight: .3

42055

Click for photos

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.

Part Number: 42055
Dimensions: 13
Weight: 0.2

RR-2

Click for photos

Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.

Part Number: RR-2
Material: chrome steel
Weight: 1.0

WB-3

Click for photos

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

==> All H4XN Accessories.

BBQ Part Categories

Broilmaster gas grill H4XN - Tuesday, May 12 2026

Return to Broilmaster grill parts main page

More Broilmaster grill models we have parts for

SBG701-1 | SBG800-1 | SBG800-2 | SBG801 | SBG802 | SBH200-1 | SBH300-1 | SBH600-1 | SBH700-1 | SBH701-1 | SR3 | SSG-36-1 | Side-Burner-BSABF12 | Side-Burner-BSABF16 | Side-Burner-BSABW16 | Side-Burner-BSAF12D | Side-Burner-DPA150 | Side-Burner-DPA151N-1 | Side-Burner-DPA151P-1 | Side-Burner-DPASBC-1 | Side-Burner-DPSBSS | Side-Burner-DPSBSS-1 | Side-Shelf-DPA153 | Side-Shelf-SKFB2 | Side-Shelf-SKFGRAY | Side-Shelf-SKFPB2 | Side-Shelf-SKFPGRAY | Side-Shelf-SKSS2 | T3 | T3-2 | T3C | T3C-2 | T3CA-2 | T3CAN-2 | T3CF | T3CF-2 | T3CFN | T3CFN-2 | T3CN | T3CN-2 | T3CW-2 | T3CWN-2 | T3N | T3N-2 | T3W-2 | T3WN-2 | U2 | U2-L | U3 | U4 | Complete list of Broilmaster grill models...

*Orders for Broilmaster grill model H4XN $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026