BBQTEK 2518SLN-LPG Grill Parts

Highest quality replacement parts for your BBQTEK 2518SLN-LPG - Free USA shipping $49 or more* - No Sales Tax*

BBQTEK 2518SLN-LPG owners manual and diagrams

Diagrams & owners manual not available for grill model# 2518SLN-LPG. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for BBQTEK model: 2518SLN-LPG

All of the parts we have for BBQTEK 2518SLN-LPG are shown on this page. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for BBQTEK grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct BBQTEK 2518SLN-LPG BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your BBQTEK model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

2518SLN-LPG Burners

Click for photos

Stainless steel tube burner for BBQTEK model 2518SLN-LPG.

SS tube burner
Electrode mounting bracket (not all models use bracket)
Spider exclusion screen
Adjustable air shutter.

NOTE: Some earlier versions of this burner, which are no longer available, were a bit larger in diameter. Some models may not need the electrode tab.

Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6

==> All BBQTEK Burners.

2518SLN-LPG Cooking Grids

Click for photos

Cast iron cooking grids for BBQTEK model 2518SLN-LPG. SET OF TWO (2) panels.

Porcelain treated, matte finish
Each panel measures 17 3/4” x 11 1/2”
Overall dimensions: 17 3/4” x 23”

Part Number: CG-101PCI-X2
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 23”
Material: cast iron
Weight: 11.6

==> All BBQTEK Cooking Grids.

2518SLN-LPG Heat Plates

Click for photos

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for BBQTEK model 2518SLN-LPG. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.16

Click for photos

SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates for BBQTEK model 2518SLN-LPG. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.7

Click for photos

Stainless steel Heat Tent/ Flame Tamer for BBQTEK model 2518SLN-LPG. Sold individually, number required varies.

Part Number: BMHP8
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 9/16”
Material: stainless steel
Weight: 0.5

==> All BBQTEK Heat Plates.

2518SLN-LPG Igniter Components

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All BBQTEK Igniter Components.

2518SLN-LPG Knobs and Handles

Click for photos

Universal 2 5/16” knob.

Selectable D-Value
Selectable socket diameter - 6mm or 8mm.
Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
Includes 6 shaft inserts and set screw.
Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

==> All BBQTEK Knobs and Handles.

2518SLN-LPG Heat indicators and Meat Thermometers

Click for photos

Round heat indicator.

Single 1 5/8” probe
2 1/8” diameter
Requires 1/4” mounting hole

Part Number: 00015
Weight: 0.10

==> All BBQTEK Heat indicators and Meat Thermometers.

2518SLN-LPG Accessories

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All 2518SLN-LPG Accessories.

BBQ Part Categories

BBQTEK gas grill 2518SLN-LPG - Tuesday, Jun 10 2025

Return to BBQTEK grill parts main page

More BBQTEK grill models we have parts for
2518SL-NG \| BC300-LPSP \| BC300E \| BC300N \| BC300N-SP-NG \| GAC3615 \| GPC2616J \| GPC2618J \| GPC2619J \| GPC2700JC \| GPC2700JD \| GPF2414 \| GPF2414AE \| GPF2414C \| GPF2414NS \| GPF2424AE \| GPF2616JC \| GPF2718JB \| GPT1813G \| GSC2318J \| GSC2318JN \| GSC2418 \| GSC2418J \| GSC2418JB \| GSC2418JBN \| GSC2418N \| GSC3218C \| GSC3218CN \| GSC3218J \| GSC3218JB \| GSC3218JBN \| GSC3218JN \| GSC3218WA \| GSC3218WAN \| GSC3218WB \| GSC3219TA \| GSC3219TN \| GSC3318 \| GSC3318N \| GSF20JD \| GSF20JDS \| GSF2616 \| GSF2616AC \| GSF2616AC-1 \| GSF2616AK \| GSF2616AKN \| GSF2818K \| GSF2818KH \| GSF2818KL \| Complete list of BBQTEK grill models...

More BBQTEK grill models we have parts for