Barbeques Galore EDV27-BQL (pre 2006) Grill Parts

12285-R Tube burner for Barbeques Galore model EDV27-BQL (pre 2006).
Premium quality stainless steel replacement burner. Fits older BGB30 series grills by Dynamic Cooking Systems.

Replaces original DCS part# 12285.

Part Number: DCS-12285-R (Replaces Barbeques Galore DCS-12285)
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

19014-02-R Grill Rack S/S 27 for Barbeques Galore model EDV27-BQL (pre 2006).
Premium quality heavy duty stainless steel grill rack. Our USA-made premium stainless cooking grids are simply the best obtainable.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

Fits BGA27 Professional Series gas grills by Dynamic Cooking Systems. Sometimes referred to as GRILL RACK BGA27.

• Replaces DCS factory part# 19014-02.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Sold individally.

Note: In later models, DCS changed the number of this part to 19495-01.

NOTE: Some versions of this part had grid lifter notches on all four corners, some had only one, and some had none. Our part has none. See part DCS-19014-03-R for grill rack with one notch.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 19 1/2” x 12 3/4” grill rack/cooking grid.

Part Number: DCS-19014-02-R (Replaces Barbeques Galore DCS-19014-02)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 8.0

19014-03-R GRILL RACK S/S 27 for Barbeques Galore model EDV27-BQL (pre 2006).
Premium quality heavy duty stainless steel grill rack with grid lifter notch. Our USA-made premium stainless cooking grids are simply the best obtainable.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

Fits BGA27 Professional Series gas grills by Dynamic Cooking Systems.

• Replaces DCS factory part# 19014-03.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA
• Sold individally.

Note: In later models, DCS changed the number of this part to 19495-02.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 19 1/2” x 12 3/4” grill rack/cooking grid.

Part Number: DCS-19014-03-R
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 8.0

Heat Plate/ Flame Tamer not known for Barbeques Galore model EDV27-BQL (pre 2006). Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Gas collector box assembly. Includes collector box, ceramic electrode, and wire. Fits both left and right hand side.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-33B (Replaces Barbeques Galore DCS-32801)
Weight: .05

DCS (9 Volt) 4-Prong Spark Generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB14-B (Replaces Barbeques Galore DCS-18349)
Weight: 0.40

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Barbeques Galore DCS-13230)
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces Barbeques Galore DCS-13017)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.

Part Number: 40070
Material: stainless steel
Weight: 2.12

Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long.

Part Number: SR-7B
Dimensions: 19 1/2
Material: chrome steel
Weight: 1.0

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30