Barbeques Galore EDV27-BQ (pre 2006) Grill Parts

304 Stainless steel 15,000 BTU infrared rotisserie burner for Barbeques Galore model EDV27-BQ (pre 2006). For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces Barbeques Galore DCS-12021-2)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

12285-R Tube burner for Barbeques Galore model EDV27-BQ (pre 2006).
Premium quality stainless steel replacement burner. Fits older BGB30 series grills by Dynamic Cooking Systems.

Replaces original DCS part# 12285.

Part Number: DCS-12285-R (Replaces Barbeques Galore DCS-12285)
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

304 Stainless steel 15,000 BTU infrared rotissierie burner for Barbeques Galore model EDV27-BQ (pre 2006). For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

19014-02-R Grill Rack S/S 27 for Barbeques Galore model EDV27-BQ (pre 2006).
Premium quality heavy duty stainless steel grill rack. Our USA-made premium stainless cooking grids are simply the best obtainable.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

Fits BGA27 Professional Series gas grills by Dynamic Cooking Systems. Sometimes referred to as GRILL RACK BGA27.

• Replaces DCS factory part# 19014-02.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Sold individally.

Note: In later models, DCS changed the number of this part to 19495-01.

NOTE: Some versions of this part had grid lifter notches on all four corners, some had only one, and some had none. Our part has none. See part DCS-19014-03-R for grill rack with one notch.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 19 1/2” x 12 3/4” grill rack/cooking grid.

Part Number: DCS-19014-02-R (Replaces Barbeques Galore DCS-19014-02)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 8.0

19014-03-R GRILL RACK S/S 27 for Barbeques Galore model EDV27-BQ (pre 2006).
Premium quality heavy duty stainless steel grill rack with grid lifter notch. Our USA-made premium stainless cooking grids are simply the best obtainable.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

Fits BGA27 Professional Series gas grills by Dynamic Cooking Systems.

• Replaces DCS factory part# 19014-03.
• Large diameter 5/16” stainless steel rods.
• Commercial grade polished 304 stainless steel.
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA
• Sold individally.

Note: In later models, DCS changed the number of this part to 19495-02.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 19 1/2” x 12 3/4” grill rack/cooking grid.

Part Number: DCS-19014-03-R
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 8.0

Heat Plate/ Flame Tamer not known for Barbeques Galore model EDV27-BQ (pre 2006). Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Gas collector box assembly. Includes collector box, ceramic electrode, and wire. Fits both left and right hand side.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-33B (Replaces Barbeques Galore DCS-32801)
Weight: .05

DCS (9 Volt) 4-Prong Spark Generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB14-B (Replaces Barbeques Galore DCS-18349)
Weight: 0.40

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Barbeques Galore DCS-13230)
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces Barbeques Galore DCS-13017)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

• Works with both charcoal and gas grills.
• Easy to use and refill.
• Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Non-Stick Wing Rack.

A convenient non-stick coated wire wing rack with folding legs, the best way to roast chicken legs and wings on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: 41551
Weight: 0.5

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0