American Outdoor Grill (AOG) 24NGL Grill Parts

24-B-06-R-X2 Stainless steel Main Burners for American Outdoor Grill (AOG) model 24NGL. SET OF TWO (2). Fits AOG 24”, 30”, and 36” grill models.

NOTE: This aftermarket burner replaces original AOG burner part# 24-B-06.

Part Number: AOG2-24-B-06-R-X2 (Replaces American Outdoor Grill (AOG) AOG-24-B-06-X2)
Dimensions: 14 1/2” x 6 15/16”
Material: stainless steel
Weight: 2.0

24-B-06-R Stainless steel Main Burner for American Outdoor Grill (AOG) model 24NGL. Fits AOG 24”, 30”, and 36” grill models.

See part 24-B-06-R-X2 and 24-B-06-R-X3 for two and three burner sets.

NOTE: This aftermarket burner replaces original AOG burner part# 24-B-06.

Part Number: AOG2-24-B-06-R (Replaces American Outdoor Grill (AOG) AOG-24-B-06)
Dimensions: 14 1/2” x 6 15/16”
Material: stainless steel
Weight: 1.0

Cooking grid not known for American Outdoor Grill (AOG) model 24NGL. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the American Outdoor Grill (AOG) cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

24-B-05-02-R-X2 Stainless Steel Vaporizer Panels for American Outdoor Grill (AOG) model 24NGL. SET OF TWO (2). Fits American Outdoor Grill (AOG) 24” L Series and T Series models.

• Made in USA
• Commercial grade 304 stainless steel
• Set of two panels for AOG 24” grills

NOTE: This aftermarket part replaces orignal AOG Vaporizer Panel part# 24-B-05-02.

Part Number: AOG2-24-B-05-02-R-X2 (Replaces American Outdoor Grill (AOG) AOG-24-B-05-02-X2)
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 4.9

24-B-05-02-R Stainless Steel Vaporizer Panel for American Outdoor Grill (AOG) model 24NGL. Fits American Outdoor Grill (AOG) 24” L Series and T Series models.

• Made in USA
• Commercial grade 304 stainless steel
• Sold individually, 24” models require two (2) panels

See part 24-B-05-02-R-X2 for a 2 panel set.

NOTE: This aftermarket part replaces orignal AOG Vaporizer Panel part# 24-B-05-02.

Part Number: AOG2-24-B-05-02-R (Replaces American Outdoor Grill (AOG) AOG-24-B-05-02)
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.45

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in any grill wide enough inside for the 24” rack.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA.

NOTE: Before ordering this universal rack, please verify your grill has enough space to accommodate it. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

gas valve for use with natural or LP gas, 8mm diameter shaft, 12 o’ clock off position, shipped without orifice

Part Number: 35010
Dimensions: 2 1/16” x 1 1/4”
Weight: 0.5

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.

Part Number: 76745
Material: stainless
Weight: .2

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Porcelain Coated Grill Topper.
11” x 16” Single draw construction for improved rigidity. Stainless steel handles and raised contours for improved functionality.

Part Number: 97122
Dimensions: 16” x 11 1/2”
Material: porcelain steel
Weight: 1.10

Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.

Part Number: 24795
Weight: .3