Every Venturi we have - 2

Plated steel twin venturi.

Part Number: DV-8
Dimensions: 4 5/8” x 2 1/2”
Material: plated steel
Weight: .3

Fits brands: Broilmaster, Warm Morning

Plated steel twin venturi.

Part Number: DV-9
Dimensions: 5 3/4
Material: plated steel
Weight: .3

Fits brands: Broilmaster, Warm Morning, Sunbeam

SS twin venturi. For use with GG-DLB and HH-DSB H burners. Includes gaskets and hardware, and spider guards. Fits JNR, WNK, and TJK grills.

Part Number: GG-DV13
Material: stainless steel
Weight: 1.0

Fits brands: MHP, PGS

Neoprene Venturi Tube Gripper.

• Fits 3/4” venturi tubes
• Simple push in fit
• Holds tubes securely over valve orifice
• Set of two.

Part Number: GRP-1B
Weight: 0.02

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

Fits brands: Charbroil, Fiesta, Great Outdoors, Kenmore, Martha Stewart, MHP, Sunbeam, Thermos, Vermont Castings, American Select, Arkla, BBQ-Pro, Backyard Grill, Blooma, Blue Ember, Brinkmann, Broil-Mate, Broilmaster, Charmglow, Coleman, Costco, Falcon, Grill Boss, Grillmaster, GrillPro, Grillrite, Huntington, Master Chef, Master Forge, Patio Chef, Patio Master, Phoenix, Pro Chef, Range Master, RevoAce, Sun Chef, Uniflame, Warm Morning

Single Gasket Kit Dlx Burners

Part Number: SHK3
Weight: 0.03

Single Gasket Kit Economy Burners

Part Number: SHK4
Weight: 0.01

Fits brands: Arkla, Brinkmann, Broil-Mate, Broilmaster, Charbroil, Charmglow, Costco, Ellipse, Falcon, Fiesta, Great Outdoors, Grillmaster, Kenmore, Patio Master, Pro Chef, Sunbeam, Thermos, Vermont Castings, Warm Morning

VENTURI TUBE 300/240 *

Part Number: SP19-13
Weight: 1.0

Fits brands: Fiesta

VENTURI 1X1 H BURNER

Part Number: SP31-13
Weight: 1.0

Fits brands: Fiesta

VENTURI 1 3/8 345 H BURNER

Part Number: SP32-13
Weight: 1.0

Fits brands: Fiesta

VENTURI BRACKET 500 GRILL

Part Number: SP51-6
Weight: 1.0

Fits brands: Blue Ember, Fiesta, Home Depot

Plated steel single 7” venturi.

Fits standard single venturi burners ELB & ESB, and deluxe single venturi burners LB & SB.

NOTE: This venturi will not fit our CSB and CLB cast iron H burners, and it will not fit our stainless steel H burners CSB, CLB, DSB, DLB, EDLB and EDSB. See venturi parts V-11 and V-12 for use on these burners.

Part Number: V-1
Dimensions: 7
Material: plated steel
Weight: .3

Fits brands: Charmglow, Kenmore, Arkla, Falcon

Stainless steel single venturi, sold individually. Flexible and adjustable from 5.5” to 8”. Gasket & screws not included, see part # SHK4.

Part Number: V-11
Dimensions: 7
Material: stainless steel
Weight: .3

Fits brands: Charmglow, Arkla, Charbroil, Falcon, Fiesta, Kenmore, Sunbeam, Thermos

Stainless steel single venturi. Flexible and adjustable from 8” to 11”. Gasket & screws not included, see part # SHK4. Sold individually.

Part Number: V-12
Dimensions: 11
Material: stainless steel
Weight: .3

Fits brands: Charmglow, Kenmore, Vermont Castings, Arkla, Brinkmann, Broil-Mate, Broilmaster, Charbroil, Costco, Ellipse, Falcon, Great Outdoors, Patio Master, Pro Chef, Sunbeam, Thermos, Warm Morning

Stainless steel single venturi, sold individually. Flexible and adjustable from 10” to 16”. For grills requiring extra-long venturi. Gasket & screws not included, see part # SHK4.

Part Number: V-12ALB
Dimensions: 10” x 16”
Material: stainless steel
Weight: .3

Fits brands: Charmglow, Kenmore

Plated steel single venturi.

Part Number: V-13
Dimensions: 8 3/8
Material: plated steel
Weight: .3

Fits brands: Charmglow, Warm Morning

Plated steel single venturi. Two (2) required when used with dual control burners such as DCB-R.

Part Number: V-14
Dimensions: 4 3/4” x 2 1/2”
Material: plated steel
Weight: .3

Fits brands: Charbroil

Plated steel single venturi. Two (2) required when used with dual control burners such as DCB-R.

Part Number: V-15
Dimensions: 3” x 3 3/4”
Material: plated steel
Weight: .3

Fits brands: Charbroil

Plated steel single venturi. Two (2) required when used with dual control burners such as DCB-R.

Part Number: V-16
Dimensions: 3” x 3 3/4”
Material: plated steel
Weight: .3

Fits brands: Charbroil

Plated steel single venturi.

Part Number: V-19
Dimensions: 5 7/8” x 2 3/4”
Material: plated steel
Weight: .3

Fits brands: Charmglow, Sunbeam

Plated steel single venturi.

Part Number: V-20
Dimensions: 5” x 4 1/8”
Material: plated steel
Weight: .3

Fits brands: Charbroil, Kenmore

Plated steel single venturi.

Part Number: V-22
Dimensions: 5 3/4” x 4 1/4”
Material: plated steel
Weight: .3

Fits brands: Sunbeam, Thermos, Arkla, Charmglow, Kenmore

Plated steel single venturi.

Part Number: V-26
Material: plated steel
Weight: .3

Plated steel single venturi.

Part Number: V-27
Dimensions: 4” x 5”
Material: plated steel
Weight: .3

Plated steel single venturi.

Part Number: V-34
Dimensions: 7 3/4” x 2 1/4”
Material: plated steel
Weight: .3

Fits brands: MHP, Thermos, Arkla, Sunbeam

Plated steel single straight venturi. Adjustable from 7 1/2” to 9 1/2”.

Part Number: V-4
Dimensions: 7 1/2” x 9 1/2”
Material: plated steel
Weight: .3

Fits brands: Broilmaster, Warm Morning

Plated steel single venturi. Used primaily with Fiesta dual and single oval burners OBS-F1 and OBS-F2.

Part Number: V-40
Dimensions: 5
Material: plated steel
Weight: .3

Fits brands: Fiesta

Stainless steel snap-lock single venturi. Used primarily with top-ported bar burner TBBC.

Part Number: V-42
Dimensions: 6 3/4” x 3 1/4”
Material: stainless steel
Weight: .3

Fits brands: Charbroil

Stainless steel snap-lock single venturi. Used primarily with top-ported bar burner TBBC.

Part Number: V-43
Dimensions: 5 1/8” x 2”
Material: stainless steel
Weight: .3

Fits brands: Charbroil

Plated steel single venturi. Left side. See part V-6 for right side.

Part Number: V-5
Dimensions: 5 1/2
Material: plated steel
Weight: .3

Fits brands: Charmglow

Plated steel single venturi. Right side. See part V-5 for left side.

Part Number: V-6
Dimensions: 5 1/2
Material: plated steel
Weight: .3

Fits brands: Charmglow

Plated steel single venturi. Adjustable from 7 1/2” to 9 1/2”.

Fits standard single venturi burners ELB & ESB, and deluxe single venturi burners LB & SB.

NOTE: This venturi will not fit our CSB and CLB cast iron H burners, and it will not fit our stainless steel H burners CSB, CLB, DSB, DLB, EDLB and EDSB. See venturi parts V-11 and V-12 for use on these burners.

Part Number: V-7A
Dimensions: 7 1/2” x 9 1/2”
Material: plated steel
Weight: .3

Fits brands: Arkla, Charmglow

Venturi Air Shutter Reducer.

• Snap-in fit
• Reduces air shutter opening to a 1/4” hole
• Required for some grills that use the aluminum tubing in place of an orifice

Part Number: VAR
Weight: 0.04