| | |
 |
| Illustration | Part Description | Price | |
|---|---|---|---|
 | Universal rotisserie motor mounting kit. Includes
Weight: 0.4 Part#: 60049-1 |
||
 | Nickel plated spit rod bushing. Accepts up to 5/16” square spit rods. Use with PH-1 spit rod handle. Material: Nickel plated steel Weight: 0.1 Part#: BU-1 |
||
 | Nickel plated spit rod bushing. Accepts up to 3/8” square spit rods. Use with PH-1 spit rod handle. Material: Nickel plated steel Weight: 0.2 Part#: BU-2 |
||
| No Illustration | Chrome plated flat rotisserie split basket with handle attachment. For chicken parts, ribs, chops, etc. Spit rod not included.17” long, 7 1/2” wide. Basket area 7” x 14” When used with handle attatchment, can be used directly on grilling surface for turning fish and other delecate foods. Material: chrome steel Weight: 2.0 Part#: CB-1H |
||
 | 304 stainless steel rotisserie motor bracket to permit motor standoff from grill. Includes two stainless steel nuts and bolts. Made in USA. Dimensions: 6” x 2 15/16” Material: stainless steel Weight: 0.4 Part#: CLA-AU0008 |
||
 | Stainless steel rotisserie bracket. Requires two holes drilled 1 3/16in on center. Made in USA. Dimensions: 3” x 2 1/2” Material: stainless steel Weight: 0.2 Part#: CLA-MS0029 |
||
 | Rotisserie motor bracket. Note: The pre-drilled holes in the MB-1B motor mounting bracket are designed to accommodate as many existing hole patterns as possible. Still, it is possible that you may have to drill new holes. Material: Nickel plated steel Weight: 0.2 Part#: MB-1B |
||
 | Rotisserie bushing bracket. Note: The pre-drilled holes in this mounting brackets are designed to accommodate as many existing hole patterns as possible. Still, it is possible that you may have to drill new holes. Material: Nickel plated steel Weight: 0.2 Part#: MB-2B |
||
 | Stainless steel rotisserie motor bracket. Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes. Material: Stainless steel Weight: 0.3 Part#: MB-3B |
||
| No Illustration | Stainless steel rotisserie motor bracket. Material: Stainless steel Weight: 0.3 Part#: MB-4B |
||
 | Four pronged universal nickel plated meat forks (set of 2). Fits up to 5/16” square spit rods. Material: Nickel plated steel Weight: 0.3 Part#: MH-1B |
||
 | Standard nickel plated 4-prong meat forks with larger bushing that accepts up to 3/8in square spit rods. Sold in pairs. Material: Nickel plated steel Weight: 0.3 Part#: MH-2B |
||
 | Set of two jumbo stainless steel meat forks. Very heavy 304 stainless steel construction. Fits up to 3/8” square spit rods. Be sure to check your spit rod dimensions as these meat forks will not fit the larger 5/8” spit rods used on some Viking grills and others. Material: stainless steel Weight: 1.0 Part#: MH-3SSB |
||
| No Illustration | Jumbo nickel plated meat forks. Heavy construction. Fits up to a 1/2in spit rod. Material: Nickel plated steel Weight: 0.3 Part#: MH-4B |
||
 | Plastic spit rod handle with brass insert. Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods). Weight: 0.2 Part#: PH-1 |
||
 | Counter balance for rotisserie spit rods.
Material: chrome steel Weight: 0.6 Part#: RCB-B |
||
 | Universal rotisserie kit. Includes:
Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes. NOTE: This kit does NOT include spit counter balance RCB-B, which should be used to insure even weight distribution. NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” rod, will not work with some of the parts in this kit. Weight: 4.6 Part#: RK-MHP |
||
 | Universal rotisserie kit. Same as RK-MHP except with longer 36” spit rod. Includes:
Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes. NOTE: This kit does NOT include spit counter balance RCB-B, which should be used to insure even weight distribution. NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” rod, will not work with some of the parts in this kit. Weight: 4.6 Part#: RK-MHP36 |
||
 | Rotisserie kit for Charmglow stainless 3-Burner models. Includes:
Note: NOTE: This kit does NOT include spit counter balance RCB-B, which should be used to insure even weight distribution. NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” rod, will not work with some of the parts in this kit. Weight: 4.6 Part#: RKCHAR1 |
||
 | Universal durable battery operated rotisserie motor. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included). Weight: 1.0 Part#: RO-4 |
||
 | Heavy duty stainless steel case universal rotisserie motor. on-off switch and 3 foot cord. Maximum 25 lb. balanced load. 6 1/4” x 4” x 2 1/8” Material: Stainless steel case Weight: 2.0 Part#: RO-6 |
||
 | Heavy duty nickel plated 43” x 3/8” square spit rod. Fits many larger grills. Tip is tapered to 5/16” square to fit many rotisserie motors, including all of ours. Rod only. Fits grills with hoods up to 38 inches wide. Be sure to measure before ordering. NOTE: At 3/8”, the SR-43 rod is slightly thicker than our other rods and will not work with some of the parts in the RK-MHP and RK-MHP36 rotisserie kits, which are designed for the smaller 5/16” rods. The following parts will work on the SR-43 rod:
Dimensions: 43” x 3/8” Material: Nickel plated steel Weight: 1.7 Part#: SR-43 |
||
 | Universal nickel plated 31” x 5/16” square spit rod. The following parts will work on the SR-5 rod:
Dimensions: 31” x 5/16” Material: Nickel plated steel Weight: 0.8 Part#: SR-5 |
||
 | Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long. Dimensions: 19 1/2” Material: chrome steel Weight: 1.0 Part#: SR-7B |
||
 | Universal nickel plated 36” x 5/16” square spit rod. Longer version of SR-5. The following parts will work on the SR-8 rod:
Dimensions: 36” x 5/16” Material: Nickel plated steel Weight: 0.9 Part#: SR-8 |
||
 | Rotisserie Tumble Basket. Chrome plated tumble basket fits standard rotisserie spit rod. Provides self-basting action. 12” x 6 1/2”. Spit rod not included. Material: chrome steel Weight: .3 Part#: TB-1 |
||
